Chris Chiu <chiu@xxxxxxxxxxxx> writes: > On Thu, Oct 17, 2019 at 10:26 AM Chris Chiu <chiu@xxxxxxxxxxxx> wrote: >> >> On Wed, Oct 16, 2019 at 9:54 AM Chris Chiu <chiu@xxxxxxxxxxxx> wrote: >> > >> > The RTL8723BU has problems connecting to AP after each warm reboot. >> > Sometimes it returns no scan result, and in most cases, it fails >> > the authentication for unknown reason. However, it works totally >> > fine after cold reboot. >> > >> > Compare the value of register SYS_CR and SYS_CLK_MAC_CLK_ENABLE >> > for cold reboot and warm reboot, the registers imply that the MAC >> > is already powered and thus some procedures are skipped during >> > driver initialization. Double checked the vendor driver, it reads >> > the SYS_CR and SYS_CLK_MAC_CLK_ENABLE also but doesn't skip any >> > during initialization based on them. This commit only tells the >> > RTL8723BU to do full initialization without checking MAC status. >> > >> > Signed-off-by: Chris Chiu <chiu@xxxxxxxxxxxx> >> Signed-off-by: Jes Sorensen <Jes.Sorensen@xxxxxxxxx> >> >> Sorry, I forgot to add Jes. >> >> Chris >> > --- >> > >> > Note: >> > v2: fix typo of commit message >> > >> > > > Gentle ping. Cheers. To reduce email please avoid pinging like this, it has been only five days since you submitted this version and this is not a 24/7 service. I have documented how you can follow the status from patchwork: https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches#checking_state_of_patches_from_patchwork -- https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
