From: Chung-Hsien Hsu <stanley.hsu@xxxxxxxxxxx>
The firmware may have SAE authentication code built-in. This is
detected by the driver and indicated in the wiphy features flags.
User-space can use this flag to determine whether or not to provide
the password material for SAE authentication in the nl80211 CONNECT
command.
Signed-off-by: Chung-Hsien Hsu <stanley.hsu@xxxxxxxxxxx>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@xxxxxxxxxxx>
---
Changelog:
V3:
- V2 1/3 and 2/3 are already in wt-2019-10-01 nl80211 code.
- Rebase V2 3/3 to wt-2019-10-01.
V2:
- Change sae_pwd_len from u16 to u8.
- Move the new attribute to bottom.
---
.../broadcom/brcm80211/brcmfmac/cfg80211.c | 73 ++++++++++++++++++++--
.../broadcom/brcm80211/brcmfmac/cfg80211.h | 3 +-
.../wireless/broadcom/brcm80211/brcmfmac/feature.c | 3 +-
.../wireless/broadcom/brcm80211/brcmfmac/feature.h | 4 +-
.../broadcom/brcm80211/brcmfmac/fwil_types.h | 13 ++++
.../broadcom/brcm80211/include/brcmu_wifi.h | 2 +
6 files changed, 90 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index e3ebb7abbdae..25f2b9e125cd 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -1282,6 +1282,31 @@ static int brcmf_set_pmk(struct brcmf_if *ifp, const u8 *pmk_data, u16 pmk_len)
return err;
}
+static int brcmf_set_sae_password(struct brcmf_if *ifp, const u8 *pwd_data,
+ u16 pwd_len)
+{
+ struct brcmf_pub *drvr = ifp->drvr;
+ struct brcmf_wsec_sae_pwd_le sae_pwd;
+ int err;
+
+ if (pwd_len > BRCMF_WSEC_MAX_SAE_PASSWORD_LEN) {
+ bphy_err(drvr, "sae_password must be less than %d\n",
+ BRCMF_WSEC_MAX_SAE_PASSWORD_LEN);
+ return -EINVAL;
+ }
+
+ sae_pwd.key_len = cpu_to_le16(pwd_len);
+ memcpy(sae_pwd.key, pwd_data, pwd_len);
+
+ err = brcmf_fil_iovar_data_set(ifp, "sae_password", &sae_pwd,
+ sizeof(sae_pwd));
+ if (err < 0)
+ bphy_err(drvr, "failed to set SAE password in firmware (len=%u)\n",
+ pwd_len);
+
+ return err;
+}
+
static void brcmf_link_down(struct brcmf_cfg80211_vif *vif, u16 reason)
{
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(vif->wdev.wiphy);
@@ -1505,6 +1530,8 @@ static s32 brcmf_set_wpa_version(struct net_device *ndev,
val = WPA_AUTH_PSK | WPA_AUTH_UNSPECIFIED;
else if (sme->crypto.wpa_versions & NL80211_WPA_VERSION_2)
val = WPA2_AUTH_PSK | WPA2_AUTH_UNSPECIFIED;
+ else if (sme->crypto.wpa_versions & NL80211_WPA_VERSION_3)
+ val = WPA3_AUTH_SAE_PSK;
else
val = WPA_AUTH_DISABLED;
brcmf_dbg(CONN, "setting wpa_auth to 0x%0x\n", val);
@@ -1537,6 +1564,10 @@ static s32 brcmf_set_auth_type(struct net_device *ndev,
val = 1;
brcmf_dbg(CONN, "shared key\n");
break;
+ case NL80211_AUTHTYPE_SAE:
+ val = 3;
+ brcmf_dbg(CONN, "SAE authentication\n");
+ break;
default:
val = 2;
brcmf_dbg(CONN, "automatic, auth type (%d)\n", sme->auth_type);
@@ -1702,6 +1733,16 @@ brcmf_set_key_mgmt(struct net_device *ndev, struct cfg80211_connect_params *sme)
sme->crypto.cipher_group);
return -EINVAL;
}
+ } else if (val & WPA3_AUTH_SAE_PSK) {
+ switch (sme->crypto.akm_suites[0]) {
+ case WLAN_AKM_SUITE_SAE:
+ val = WPA3_AUTH_SAE_PSK;
+ break;
+ default:
+ bphy_err(drvr, "invalid cipher group (%d)\n",
+ sme->crypto.cipher_group);
+ return -EINVAL;
+ }
}
if (profile->use_fwsup == BRCMF_PROFILE_FWSUP_1X)
@@ -1773,7 +1814,8 @@ brcmf_set_sharedkey(struct net_device *ndev,
brcmf_dbg(CONN, "wpa_versions 0x%x cipher_pairwise 0x%x\n",
sec->wpa_versions, sec->cipher_pairwise);
- if (sec->wpa_versions & (NL80211_WPA_VERSION_1 | NL80211_WPA_VERSION_2))
+ if (sec->wpa_versions & (NL80211_WPA_VERSION_1 | NL80211_WPA_VERSION_2 |
+ NL80211_WPA_VERSION_3))
return 0;
if (!(sec->cipher_pairwise &
@@ -1980,7 +2022,13 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev,
goto done;
}
- if (sme->crypto.psk) {
+ if (sme->crypto.sae_pwd) {
+ brcmf_dbg(INFO, "using SAE offload\n");
+ profile->use_fwsup = BRCMF_PROFILE_FWSUP_SAE;
+ }
+
+ if (sme->crypto.psk &&
+ profile->use_fwsup != BRCMF_PROFILE_FWSUP_SAE) {
if (WARN_ON(profile->use_fwsup != BRCMF_PROFILE_FWSUP_NONE)) {
err = -EINVAL;
goto done;
@@ -1998,12 +2046,23 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev,
}
}
- if (profile->use_fwsup == BRCMF_PROFILE_FWSUP_PSK) {
+ if (profile->use_fwsup == BRCMF_PROFILE_FWSUP_PSK)
err = brcmf_set_pmk(ifp, sme->crypto.psk,
BRCMF_WSEC_MAX_PSK_LEN);
- if (err)
+ else if (profile->use_fwsup == BRCMF_PROFILE_FWSUP_SAE) {
+ /* clean up user-space RSNE */
+ if (brcmf_fil_iovar_data_set(ifp, "wpaie", NULL, 0)) {
+ bphy_err(drvr, "failed to clean up user-space RSNE\n");
goto done;
+ }
+ err = brcmf_set_sae_password(ifp, sme->crypto.sae_pwd,
+ sme->crypto.sae_pwd_len);
+ if (!err && sme->crypto.psk)
+ err = brcmf_set_pmk(ifp, sme->crypto.psk,
+ BRCMF_WSEC_MAX_PSK_LEN);
}
+ if (err)
+ goto done;
/* Join with specific BSSID and cached SSID
* If SSID is zero join based on BSSID only
@@ -5359,7 +5418,8 @@ static bool brcmf_is_linkup(struct brcmf_cfg80211_vif *vif,
if (event == BRCMF_E_SET_SSID && status == BRCMF_E_STATUS_SUCCESS) {
brcmf_dbg(CONN, "Processing set ssid\n");
memcpy(vif->profile.bssid, e->addr, ETH_ALEN);
- if (vif->profile.use_fwsup != BRCMF_PROFILE_FWSUP_PSK)
+ if (vif->profile.use_fwsup != BRCMF_PROFILE_FWSUP_PSK &&
+ vif->profile.use_fwsup != BRCMF_PROFILE_FWSUP_SAE)
return true;
set_bit(BRCMF_VIF_STATUS_ASSOC_SUCCESS, &vif->sme_state);
@@ -6664,6 +6724,9 @@ static int brcmf_setup_wiphy(struct wiphy *wiphy, struct brcmf_if *ifp)
NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK);
wiphy_ext_feature_set(wiphy,
NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X);
+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_SAE))
+ wiphy_ext_feature_set(wiphy,
+ NL80211_EXT_FEATURE_SAE_OFFLOAD);
}
wiphy->mgmt_stypes = brcmf_txrx_stypes;
wiphy->max_remain_on_channel_duration = 5000;
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
index 14d5bbad1db1..411457a4f85d 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
@@ -107,7 +107,8 @@ struct brcmf_cfg80211_security {
enum brcmf_profile_fwsup {
BRCMF_PROFILE_FWSUP_NONE,
BRCMF_PROFILE_FWSUP_PSK,
- BRCMF_PROFILE_FWSUP_1X
+ BRCMF_PROFILE_FWSUP_1X,
+ BRCMF_PROFILE_FWSUP_SAE
};
/**
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
index 2c3526aeca6f..1c9c74cc958e 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
@@ -39,7 +39,8 @@ static const struct brcmf_feat_fwcap brcmf_fwcap_map[] = {
{ BRCMF_FEAT_P2P, "p2p" },
{ BRCMF_FEAT_MONITOR, "monitor" },
{ BRCMF_FEAT_MONITOR_FMT_RADIOTAP, "rtap" },
- { BRCMF_FEAT_DOT11H, "802.11h" }
+ { BRCMF_FEAT_DOT11H, "802.11h" },
+ { BRCMF_FEAT_SAE, "sae" },
};
#ifdef DEBUG
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h
index 736a8179f62f..280a1f6412d4 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h
@@ -26,6 +26,7 @@
* MONITOR_FMT_RADIOTAP: firmware provides monitor packets with radiotap header
* MONITOR_FMT_HW_RX_HDR: firmware provides monitor packets with hw/ucode header
* DOT11H: firmware supports 802.11h
+ * SAE: simultaneous authentication of equals
*/
#define BRCMF_FEAT_LIST \
BRCMF_FEAT_DEF(MBSS) \
@@ -45,7 +46,8 @@
BRCMF_FEAT_DEF(MONITOR) \
BRCMF_FEAT_DEF(MONITOR_FMT_RADIOTAP) \
BRCMF_FEAT_DEF(MONITOR_FMT_HW_RX_HDR) \
- BRCMF_FEAT_DEF(DOT11H)
+ BRCMF_FEAT_DEF(DOT11H) \
+ BRCMF_FEAT_DEF(SAE)
/*
* Quirks:
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
index 37c512036e0e..de0ef1b545c4 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
@@ -61,6 +61,8 @@
#define BRCMF_WSEC_MAX_PSK_LEN 32
#define BRCMF_WSEC_PASSPHRASE BIT(0)
+#define BRCMF_WSEC_MAX_SAE_PASSWORD_LEN 128
+
/* primary (ie tx) key */
#define BRCMF_PRIMARY_KEY (1 << 1)
#define DOT11_BSSTYPE_ANY 2
@@ -518,6 +520,17 @@ struct brcmf_wsec_pmk_le {
u8 key[2 * BRCMF_WSEC_MAX_PSK_LEN + 1];
};
+/**
+ * struct brcmf_wsec_sae_pwd_le - firmware SAE password material.
+ *
+ * @key_len: number of octets in key materials.
+ * @key: SAE password material.
+ */
+struct brcmf_wsec_sae_pwd_le {
+ __le16 key_len;
+ u8 key[BRCMF_WSEC_MAX_SAE_PASSWORD_LEN];
+};
+
/* Used to get specific STA parameters */
struct brcmf_scb_val_le {
__le32 val;
diff --git a/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h b/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h
index 7b31c212694d..7552bdb91991 100644
--- a/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h
+++ b/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h
@@ -231,6 +231,8 @@ static inline bool ac_bitmap_tst(u8 bitmap, int prec)
#define WPA2_AUTH_FT 0x4000 /* Fast BSS Transition */
#define WPA2_AUTH_PSK_SHA256 0x8000 /* PSK with SHA256 key derivation */
+#define WPA3_AUTH_SAE_PSK 0x40000 /* SAE with 4-way handshake */
+
#define DOT11_DEFAULT_RTS_LEN 2347
#define DOT11_DEFAULT_FRAG_LEN 2346
--
2.1.0
