[PATCH v2 4/8] rtw88: 8822c: add FW IQK support

[<yhchuang@xxxxxxxxxxx>]

From: Yan-Hsuan Chuang <yhchuang@xxxxxxxxxxx>

Add support for doing IQK in firmware

Ideally the RF component's I/Q vectors should be orthogonal,
but usually they are not. So we need to calibrate for the RF
components, ex. PA/LNA, ADC/DAC.

And if the I/Q vectors are more orthogonal, the mixed signal
will have less deviation. This helps with those rates with
higher modulation (MCS8-9), because they have more strict
EVM/SNR requirement. Also the better of the quality of the
signal, the longer it can propagate, and the better throughput
performance we can get.

Signed-off-by: Yan-Hsuan Chuang <yhchuang@xxxxxxxxxxx>
---

v1 -> v2
   * add more log to describe IQK

 drivers/net/wireless/realtek/rtw88/rtw8822c.c | 16 ++++++++++++++++
 drivers/net/wireless/realtek/rtw88/rtw8822c.h |  2 ++
 2 files changed, 18 insertions(+)

diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822c.c b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
index e11bbc3..176ca5f 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822c.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
@@ -1876,6 +1876,22 @@ static void rtw8822c_false_alarm_statistics(struct rtw_dev *rtwdev)
 
 static void rtw8822c_do_iqk(struct rtw_dev *rtwdev)
 {
+	struct rtw_iqk_para para = {0};
+	u8 iqk_chk;
+	int counter;
+
+	para.clear = 1;
+	rtw_fw_do_iqk(rtwdev, &para);
+
+	for (counter = 0; counter < 300; counter++) {
+		iqk_chk = rtw_read8(rtwdev, REG_RPT_CIP);
+		if (iqk_chk == 0xaa)
+			break;
+		msleep(20);
+	}
+	rtw_write8(rtwdev, REG_IQKSTAT, 0x0);
+
+	rtw_dbg(rtwdev, RTW_DBG_RFK, "iqk counter=%d\n", counter);
 }
 
 /* for coex */
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822c.h b/drivers/net/wireless/realtek/rtw88/rtw8822c.h
index 5ee1de4..14a8894 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822c.h
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822c.h
@@ -176,6 +176,7 @@ struct rtw8822c_efuse {
 #define REG_TXF7	0x1ab0
 #define REG_CCK_SOURCE	0x1abc
 #define BIT_NBI_EN		BIT(30)
+#define REG_IQKSTAT	0x1b10
 #define REG_TXANT	0x1c28
 #define REG_ENCCK	0x1c3c
 #define BIT_CCK_BLK_EN		BIT(1)
@@ -197,6 +198,7 @@ struct rtw8822c_efuse {
 #define REG_OFDM_FACNT3	0x2d0c
 #define REG_OFDM_FACNT4	0x2d10
 #define REG_OFDM_FACNT5	0x2d20
+#define REG_RPT_CIP	0x2d9c
 #define REG_OFDM_TXCNT	0x2de0
 #define REG_ORITXCODE2	0x4100
 #define REG_3WIRE2	0x410c
-- 
2.7.4