Add programming initialisation and termination functions.
Add checks to avoid overrunning the firmware image or PDA areas.
Extra algorithm to program PDA values using defaults where necessary.
Signed-off-by: David Kilroy <kilroyd@xxxxxxxxx>
---
drivers/net/wireless/hermes_dld.c | 285 +++++++++++++++++++++++++++++++++++++
drivers/net/wireless/hermes_dld.h | 5 +
2 files changed, 290 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/hermes_dld.c b/drivers/net/wireless/hermes_dld.c
index 454452f..4f11363 100644
--- a/drivers/net/wireless/hermes_dld.c
+++ b/drivers/net/wireless/hermes_dld.c
@@ -70,6 +70,12 @@ MODULE_LICENSE("Dual MPL/GPL");
#define HERMES_AUX_PW1 0xDC23
#define HERMES_AUX_PW2 0xBA45
+/* HERMES_CMD_DOWNLD */
+#define HERMES_PROGRAM_DISABLE (0x0000 | HERMES_CMD_DOWNLD)
+#define HERMES_PROGRAM_ENABLE_VOLATILE (0x0100 | HERMES_CMD_DOWNLD)
+#define HERMES_PROGRAM_ENABLE_NON_VOLATILE (0x0200 | HERMES_CMD_DOWNLD)
+#define HERMES_PROGRAM_NON_VOLATILE (0x0300 | HERMES_CMD_DOWNLD)
+
/* End markers used in dblocks */
#define PDI_END 0x00000000 /* End of PDA */
#define BLOCK_END 0xFFFFFFFF /* Last image block */
@@ -247,6 +253,23 @@ hermes_find_pdr(struct pdr *first_pdr, u32 record_id)
return NULL;
}
+/* Scan production data items for a particular entry */
+static struct pdi *
+hermes_find_pdi(struct pdi *first_pdi, u32 record_id)
+{
+ struct pdi *pdi = first_pdi;
+
+ while (pdi_id(pdi) != PDI_END) {
+
+ /* If the record ID matches, we are done */
+ if (pdi_id(pdi) == record_id)
+ return pdi;
+
+ pdi = (struct pdi *) &pdi->data[pdi_len(pdi)];
+ }
+ return NULL;
+}
+
/* Process one Plug Data Item - find corresponding PDR and plug it */
static int
hermes_plug_pdi(hermes_t *hw, struct pdr *first_pdr, const struct pdi *pdi)
@@ -290,6 +313,15 @@ int hermes_read_pda(hermes_t *hw,
ret = hermes_docmd_wait(hw, HERMES_CMD_READMIF, 0, NULL);
if (ret)
return ret;
+ } else {
+ /* wl_lkm does not include PDA size in the PDA area.
+ * We will pad the information into pda, so other routines
+ * don't have to be modified */
+ pda[0] = cpu_to_le16(pda_len - 2);
+ /* Includes CFG_PROD_DATA but not itself */
+ pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */
+ data_len = pda_len - 4;
+ data = pda + 2;
}
/* Open auxiliary port */
@@ -370,6 +402,94 @@ EXPORT_SYMBOL(hermes_blocks_length);
/*** Hermes programming ***/
+/* About to start programming data (Hermes I)
+ * offset is the entry point
+ *
+ * Spectrum_cs' Symbol fw does not require this
+ * wl_lkm Agere fw does
+ * Don't know about intersil
+ */
+int hermesi_program_init(hermes_t *hw, u32 offset)
+{
+ int err;
+
+ /* Disable interrupts?*/
+ /*hw->inten = 0x0;*/
+ /*hermes_write_regn(hw, INTEN, 0);*/
+ /*hermes_set_irqmask(hw, 0);*/
+
+ /* Acknowledge any outstanding command */
+ hermes_write_regn(hw, EVACK, 0xFFFF);
+
+ /* Using doicmd_wait rather than docmd_wait */
+ err = hermes_doicmd_wait(hw,
+ 0x0100 | HERMES_CMD_INIT,
+ 0, 0, 0, NULL);
+ if (err)
+ return err;
+
+ err = hermes_doicmd_wait(hw,
+ 0x0000 | HERMES_CMD_INIT,
+ 0, 0, 0, NULL);
+ if (err)
+ return err;
+
+ err = hermes_aux_control(hw, 1);
+ printk(KERN_DEBUG PFX "AUX enable returned %d\n", err);
+
+ if (err)
+ return err;
+
+ printk(KERN_DEBUG PFX "Enabling volatile, EP 0x%08x\n", offset);
+ err = hermes_doicmd_wait(hw,
+ HERMES_PROGRAM_ENABLE_VOLATILE,
+ offset & 0xFFFFu,
+ offset >> 16,
+ 0,
+ NULL);
+ printk(KERN_DEBUG PFX "PROGRAM_ENABLE returned %d\n",
+ err);
+
+ return err;
+}
+EXPORT_SYMBOL(hermesi_program_init);
+
+/* Done programming data (Hermes I)
+ *
+ * Spectrum_cs' Symbol fw does not require this
+ * wl_lkm Agere fw does
+ * Don't know about intersil
+ */
+int hermesi_program_end(hermes_t *hw)
+{
+ struct hermes_response resp;
+ int rc = 0;
+ int err;
+
+ rc = hermes_docmd_wait(hw, HERMES_PROGRAM_DISABLE, 0, &resp);
+
+ printk(KERN_DEBUG PFX "PROGRAM_DISABLE returned %d, "
+ "r0 0x%04x, r1 0x%04x, r2 0x%04x\n",
+ rc, resp.resp0, resp.resp1, resp.resp2);
+
+ if ((rc == 0) &&
+ ((resp.status & HERMES_STATUS_CMDCODE) != HERMES_CMD_DOWNLD))
+ rc = -EIO;
+
+ err = hermes_aux_control(hw, 0);
+ printk(KERN_DEBUG PFX "AUX disable returned %d\n", err);
+
+ /* Acknowledge any outstanding command */
+ hermes_write_regn(hw, EVACK, 0xFFFF);
+
+ /* Reinitialise, ignoring return */
+ (void) hermes_doicmd_wait(hw, 0x0000 | HERMES_CMD_INIT,
+ 0, 0, 0, NULL);
+
+ return rc ? rc : err;
+}
+EXPORT_SYMBOL(hermesi_program_end);
+
/* Program the data blocks */
int hermes_program(hermes_t *hw, const char *first_block, const char *end)
{
@@ -443,3 +563,168 @@ static void __exit exit_hermes_dld(void)
module_init(init_hermes_dld);
module_exit(exit_hermes_dld);
+
+/*** Default plugging data for Hermes I ***/
+/* Values from wl_lkm_718/hcf/dhf.c */
+
+#define DEFINE_DEFAULT_PDR(pid, length, data) \
+static const struct { \
+ __le16 len; \
+ __le16 id; \
+ u8 val[length]; \
+} __attribute__ ((packed)) default_pdr_data_##pid = { \
+ __constant_cpu_to_le16((sizeof(default_pdr_data_##pid)/ \
+ sizeof(__le16)) - 1), \
+ __constant_cpu_to_le16(pid), \
+ data \
+}
+
+#define DEFAULT_PDR(pid) default_pdr_data_##pid
+
+/* HWIF Compatiblity */
+DEFINE_DEFAULT_PDR(0x0005, 10, "\x00\x00\x06\x00\x01\x00\x01\x00\x01\x00");
+
+/* PPPPSign */
+DEFINE_DEFAULT_PDR(0x0108, 4, "\x00\x00\x00\x00");
+
+/* PPPPProf */
+DEFINE_DEFAULT_PDR(0x0109, 10, "\x00\x00\x00\x00\x03\x00\x00\x00\x00\x00");
+
+/* Antenna diversity */
+DEFINE_DEFAULT_PDR(0x0150, 2, "\x00\x3F");
+
+/* Modem VCO band Set-up */
+DEFINE_DEFAULT_PDR(0x0160, 28,
+ "\x00\x00\x00\x00\x00\x00\x00\x00"
+ "\x00\x00\x00\x00\x00\x00\x00\x00"
+ "\x00\x00\x00\x00\x00\x00\x00\x00"
+ "\x00\x00\x00\x00");
+
+/* Modem Rx Gain Table Values */
+DEFINE_DEFAULT_PDR(0x0161, 256,
+ "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
+ "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
+ "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
+ "\x3F\x01\x3F\01\x3F\x01\x3F\x01"
+ "\x3F\x01\x3E\01\x3E\x01\x3D\x01"
+ "\x3D\x01\x3C\01\x3C\x01\x3B\x01"
+ "\x3B\x01\x3A\01\x3A\x01\x39\x01"
+ "\x39\x01\x38\01\x38\x01\x37\x01"
+ "\x37\x01\x36\01\x36\x01\x35\x01"
+ "\x35\x01\x34\01\x34\x01\x33\x01"
+ "\x33\x01\x32\x01\x32\x01\x31\x01"
+ "\x31\x01\x30\x01\x30\x01\x7B\x01"
+ "\x7B\x01\x7A\x01\x7A\x01\x79\x01"
+ "\x79\x01\x78\x01\x78\x01\x77\x01"
+ "\x77\x01\x76\x01\x76\x01\x75\x01"
+ "\x75\x01\x74\x01\x74\x01\x73\x01"
+ "\x73\x01\x72\x01\x72\x01\x71\x01"
+ "\x71\x01\x70\x01\x70\x01\x68\x01"
+ "\x68\x01\x67\x01\x67\x01\x66\x01"
+ "\x66\x01\x65\x01\x65\x01\x57\x01"
+ "\x57\x01\x56\x01\x56\x01\x55\x01"
+ "\x55\x01\x54\x01\x54\x01\x53\x01"
+ "\x53\x01\x52\x01\x52\x01\x51\x01"
+ "\x51\x01\x50\x01\x50\x01\x48\x01"
+ "\x48\x01\x47\x01\x47\x01\x46\x01"
+ "\x46\x01\x45\x01\x45\x01\x44\x01"
+ "\x44\x01\x43\x01\x43\x01\x42\x01"
+ "\x42\x01\x41\x01\x41\x01\x40\x01"
+ "\x40\x01\x40\x01\x40\x01\x40\x01"
+ "\x40\x01\x40\x01\x40\x01\x40\x01"
+ "\x40\x01\x40\x01\x40\x01\x40\x01"
+ "\x40\x01\x40\x01\x40\x01\x40\x01");
+
+/* Write PDA according to certain rules.
+ *
+ * For every production data record, look for a previous setting in
+ * the pda, and use that.
+ *
+ * For certain records, use defaults if they are not found in pda.
+ */
+int hermes_apply_pda_with_defaults(hermes_t *hw,
+ const char *first_pdr,
+ const __le16 *pda)
+{
+ const struct pdr *pdr = (const struct pdr *) first_pdr;
+ struct pdi *first_pdi = (struct pdi *) &pda[2];
+ struct pdi *pdi;
+ struct pdi *default_pdi = NULL;
+ struct pdi *outdoor_pdi;
+ void *end = (void *)first_pdr + MAX_PDA_SIZE;
+ int record_id;
+
+ while (((void *)pdr < end) &&
+ (pdr_id(pdr) != PDI_END)) {
+ /*
+ * For spectrum_cs firmwares,
+ * PDR area is currently not terminated by PDI_END.
+ * It's followed by CRC records, which have the type
+ * field where PDR has length. The type can be 0 or 1.
+ */
+ if (pdr_len(pdr) < 2)
+ break;
+ record_id = pdr_id(pdr);
+
+ pdi = hermes_find_pdi(first_pdi, record_id);
+ if (pdi)
+ printk(KERN_DEBUG PFX "Found record 0x%04x at %p\n",
+ record_id, pdi);
+
+ switch (record_id) {
+ case 0x110: /* Modem REFDAC values */
+ case 0x120: /* Modem VGDAC values */
+ outdoor_pdi = hermes_find_pdi(first_pdi, record_id + 1);
+ default_pdi = NULL;
+ if (outdoor_pdi) {
+ pdi = outdoor_pdi;
+ printk(KERN_DEBUG PFX
+ "Using outdoor record 0x%04x at %p\n",
+ record_id + 1, pdi);
+ }
+ break;
+ case 0x5: /* HWIF Compatiblity */
+ default_pdi = (struct pdi *) &DEFAULT_PDR(0x0005);
+ break;
+ case 0x108: /* PPPPSign */
+ default_pdi = (struct pdi *) &DEFAULT_PDR(0x0108);
+ break;
+ case 0x109: /* PPPPProf */
+ default_pdi = (struct pdi *) &DEFAULT_PDR(0x0109);
+ break;
+ case 0x150: /* Antenna diversity */
+ default_pdi = (struct pdi *) &DEFAULT_PDR(0x0150);
+ break;
+ case 0x160: /* Modem VCO band Set-up */
+ default_pdi = (struct pdi *) &DEFAULT_PDR(0x0160);
+ break;
+ case 0x161: /* Modem Rx Gain Table Values */
+ default_pdi = (struct pdi *) &DEFAULT_PDR(0x0161);
+ break;
+ default:
+ default_pdi = NULL;
+ break;
+ }
+ if (!pdi && default_pdi) {
+ /* Use default */
+ pdi = default_pdi;
+ printk(KERN_DEBUG PFX
+ "Using default record 0x%04x at %p\n",
+ record_id, pdi);
+ }
+
+ if (pdi) {
+ /* Lengths of the data in PDI and PDR must match */
+ if (pdi_len(pdi) == pdr_len(pdr)) {
+ /* do the actual plugging */
+ hermes_aux_setaddr(hw, pdr_addr(pdr));
+ hermes_write_bytes(hw, HERMES_AUXDATA,
+ pdi->data, pdi_len(pdi));
+ }
+ }
+
+ pdr++;
+ }
+ return 0;
+}
+EXPORT_SYMBOL(hermes_apply_pda_with_defaults);
diff --git a/drivers/net/wireless/hermes_dld.h b/drivers/net/wireless/hermes_dld.h
index a39a482..c13a1c2 100644
--- a/drivers/net/wireless/hermes_dld.h
+++ b/drivers/net/wireless/hermes_dld.h
@@ -27,6 +27,8 @@
#include "hermes.h"
+int hermesi_program_init(hermes_t *hw, u32 offset);
+int hermesi_program_end(hermes_t *hw);
int hermes_program(hermes_t *hw, const char *first_block, const char *end);
int hermes_read_pda(hermes_t *hw,
@@ -37,6 +39,9 @@ int hermes_read_pda(hermes_t *hw,
int hermes_apply_pda(hermes_t *hw,
const char *first_pdr,
const __le16 *pda);
+int hermes_apply_pda_with_defaults(hermes_t *hw,
+ const char *first_pdr,
+ const __le16 *pda);
size_t hermes_blocks_length(const char *first_block);
--
1.5.4.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
