This is needed to have the AP mode working for SDIO. Tested with lastest master/pending code on a QCA6564 chip with firmware firmware-sdio-6.bin_WLAN.RMH.4.4.1-00011-QCARMSWP-2 Signed-off-by: Isaac Hermida <isaac.hermida@xxxxxxxx> --- drivers/net/wireless/ath/ath10k/mac.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index e43a566eef77..2c4f8da98b24 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -5150,6 +5150,9 @@ static int ath10k_add_interface(struct ieee80211_hw *hw, arvif->ar = ar; arvif->vif = vif; + // assign type of the new interface to the parent type (SDIO, PCI, etc) + ar->dev_type = arvif->ar->bus_param.dev_type; + INIT_LIST_HEAD(&arvif->list); INIT_WORK(&arvif->ap_csa_work, ath10k_mac_vif_ap_csa_work); INIT_DELAYED_WORK(&arvif->connection_loss_work,
