Search Linux Wireless

[PATCH 5/7] mmc: sdio: Don't re-initialize powered-on removable SDIO cards at resume

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



It looks like the original idea behind always doing a re-initialization of
a removable SDIO card during system resume in mmc_sdio_resume(), is to try
to play safe to detect whether the card has been removed.

However, this seems like a really a bad idea as it will most likely screw
things up, especially when the card is expected to remain powered on during
system suspend by the SDIO func driver.

Let's fix this, simply by trusting that the detect work checks if the card
is alive and inserted, which is being scheduled at the PM_POST_SUSPEND
notification anyway.

Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
---
 drivers/mmc/core/sdio.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index a9bfcae8db5b..945416c53b56 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -982,7 +982,11 @@ static int mmc_sdio_resume(struct mmc_host *host)
 	/* Basic card reinitialization. */
 	mmc_claim_host(host);
 
-	/* Restore power if needed */
+	/*
+	 * Restore power and reinitialize the card when needed. Note that a
+	 * removable card is checked from a detect work later on in the resume
+	 * process.
+	 */
 	if (!mmc_card_keep_power(host)) {
 		mmc_power_up(host, host->card->ocr);
 		/*
@@ -996,12 +1000,8 @@ static int mmc_sdio_resume(struct mmc_host *host)
 			pm_runtime_set_active(&host->card->dev);
 			pm_runtime_enable(&host->card->dev);
 		}
-	}
-
-	/* No need to reinitialize powered-resumed nonremovable cards */
-	if (mmc_card_is_removable(host) || !mmc_card_keep_power(host)) {
-		err = mmc_sdio_reinit_card(host, mmc_card_keep_power(host));
-	} else if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) {
+		err = mmc_sdio_reinit_card(host, 0);
+	} else if (mmc_card_wake_sdio_irq(host)) {
 		/* We may have switched to 1-bit mode during suspend */
 		err = sdio_enable_4bit_bus(host->card);
 	}
-- 
2.17.1




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux