For PMF case, the action,deauth,disassoc management need to encrypt
by hardware, it need to reserve 8 bytes for encryption, otherwise
the packet will be sent out with error format, then PMF case will
fail.
After add the 8 bytes, it will pass the PMF case.
Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00005-QCARMSWP-1.
Signed-off-by: Wen Gong <wgong@xxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath10k/htt_tx.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index d8e9cc0..7bef9d9 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -1236,6 +1236,7 @@ static int ath10k_htt_tx_hl(struct ath10k_htt *htt, enum ath10k_hw_txrx_mode txm
struct ath10k *ar = htt->ar;
int res, data_len;
struct htt_cmd_hdr *cmd_hdr;
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)msdu->data;
struct htt_data_tx_desc *tx_desc;
struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(msdu);
struct sk_buff *tmp_skb;
@@ -1245,6 +1246,13 @@ static int ath10k_htt_tx_hl(struct ath10k_htt *htt, enum ath10k_hw_txrx_mode txm
u8 flags0 = 0;
u16 flags1 = 0;
+ if ((ieee80211_is_action(hdr->frame_control) ||
+ ieee80211_is_deauth(hdr->frame_control) ||
+ ieee80211_is_disassoc(hdr->frame_control)) &&
+ ieee80211_has_protected(hdr->frame_control)) {
+ skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
+ }
+
data_len = msdu->len;
switch (txmode) {
--
1.9.1
