Search Linux Wireless

[PATCH v2 08/11] rtw88: power on again if it was already on

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Yan-Hsuan Chuang <yhchuang@xxxxxxxxxxx>

We could fail to power on because it was already on. If the return
value is -EALREADY, power off and then power on again to turn on the
hardware as expected.

Signed-off-by: Yan-Hsuan Chuang <yhchuang@xxxxxxxxxxx>
---
 drivers/net/wireless/realtek/rtw88/mac.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtw88/mac.c b/drivers/net/wireless/realtek/rtw88/mac.c
index 25a923b..fc14b37 100644
--- a/drivers/net/wireless/realtek/rtw88/mac.c
+++ b/drivers/net/wireless/realtek/rtw88/mac.c
@@ -285,8 +285,14 @@ int rtw_mac_power_on(struct rtw_dev *rtwdev)
 		goto err;
 
 	ret = rtw_mac_power_switch(rtwdev, true);
-	if (ret)
+	if (ret == -EALREADY) {
+		rtw_mac_power_switch(rtwdev, false);
+		ret = rtw_mac_power_switch(rtwdev, true);
+		if (ret)
+			goto err;
+	} else if (ret) {
 		goto err;
+	}
 
 	ret = rtw_mac_init_system_cfg(rtwdev);
 	if (ret)
-- 
2.7.4




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux