Search Linux Wireless

[PATCH 02/11] rtw88: add support for random mac scan

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Yan-Hsuan Chuang <yhchuang@xxxxxxxxxxx>

When driver uses random mac address to scan, the unicast probe response
will not be received because the addr1 is not matched. Configure port
address by requested mac address to receive probe response from AP.

To support random mac scan, we need to configure the mac address during
scan period to receive unicast prop_resp. After scan is completed,
configure the mac address back to the original one that the port used.

Signed-off-by: Yan-Hsuan Chuang <yhchuang@xxxxxxxxxxx>
---
 drivers/net/wireless/realtek/rtw88/mac80211.c | 19 +++++++++++++++++++
 drivers/net/wireless/realtek/rtw88/main.c     |  2 ++
 2 files changed, 21 insertions(+)

diff --git a/drivers/net/wireless/realtek/rtw88/mac80211.c b/drivers/net/wireless/realtek/rtw88/mac80211.c
index abded63..61436bb 100644
--- a/drivers/net/wireless/realtek/rtw88/mac80211.c
+++ b/drivers/net/wireless/realtek/rtw88/mac80211.c
@@ -446,20 +446,39 @@ static void rtw_ops_sw_scan_start(struct ieee80211_hw *hw,
 {
 	struct rtw_dev *rtwdev = hw->priv;
 	struct rtw_vif *rtwvif = (struct rtw_vif *)vif->drv_priv;
+	u32 config = 0;
 
 	rtw_leave_lps(rtwdev, rtwvif);
 
+	mutex_lock(&rtwdev->mutex);
+
+	ether_addr_copy(rtwvif->mac_addr, mac_addr);
+	config |= PORT_SET_MAC_ADDR;
+	rtw_vif_port_config(rtwdev, rtwvif, config);
+
 	rtw_flag_set(rtwdev, RTW_FLAG_DIG_DISABLE);
 	rtw_flag_set(rtwdev, RTW_FLAG_SCANNING);
+
+	mutex_unlock(&rtwdev->mutex);
 }
 
 static void rtw_ops_sw_scan_complete(struct ieee80211_hw *hw,
 				     struct ieee80211_vif *vif)
 {
 	struct rtw_dev *rtwdev = hw->priv;
+	struct rtw_vif *rtwvif = (struct rtw_vif *)vif->drv_priv;
+	u32 config = 0;
+
+	mutex_lock(&rtwdev->mutex);
 
 	rtw_flag_clear(rtwdev, RTW_FLAG_SCANNING);
 	rtw_flag_clear(rtwdev, RTW_FLAG_DIG_DISABLE);
+
+	ether_addr_copy(rtwvif->mac_addr, vif->addr);
+	config |= PORT_SET_MAC_ADDR;
+	rtw_vif_port_config(rtwdev, rtwvif, config);
+
+	mutex_unlock(&rtwdev->mutex);
 }
 
 const struct ieee80211_ops rtw_ops = {
diff --git a/drivers/net/wireless/realtek/rtw88/main.c b/drivers/net/wireless/realtek/rtw88/main.c
index d2e8d2e..306d799 100644
--- a/drivers/net/wireless/realtek/rtw88/main.c
+++ b/drivers/net/wireless/realtek/rtw88/main.c
@@ -1178,6 +1178,8 @@ int rtw_register_hw(struct rtw_dev *rtwdev, struct ieee80211_hw *hw)
 	hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS |
 			    WIPHY_FLAG_TDLS_EXTERNAL_SETUP;
 
+	hw->wiphy->features |= NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR;
+
 	rtw_set_supported_band(hw, rtwdev->chip);
 	SET_IEEE80211_PERM_ADDR(hw, rtwdev->efuse.addr);
 
-- 
2.7.4




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux