>I think you should write to the openwrt mailing list and/or its bug tracker >and see if they can help. Ok. Thanks Ben. will do. Just curious. I am not able to get the reg. domain codes in TPC by googling. Do you know where I can get those? What is the reg. domains 0x20 and 0x58 value points to? Thanks On Mon, May 13, 2019 at 11:17 AM Ben Greear <greearb@xxxxxxxxxxxxxxx> wrote: > > On 5/13/19 11:10 AM, Sam Samy wrote: > > hi Ben, > > > > I also looked at the TPC on the stock firmware on the AP. There is a > > difference. > > I think you should write to the openwrt mailing list and/or its bug tracker > and see if they can help. > > Thanks, > Ben > > > > > Here is the snippet from stock firmware: > > > > TPC Config for channel 5765 mode 10 > > ************************************************** > > CTL = 0x10 Reg. Domain = 20 > > Antenna Gain = 0 Reg. Max Antenna Gain = 12 > > Power Limit = 63 Reg. Max Power = 60 > > Num tx chains = 2 Num Supported Rates = 109 > > ************************************************** > > **************** CDD POWER TABLE **************** > > ************************************************** > > > > Where as in openwrt it is: > > > > ************************************* > > TPC config for channel 5765 mode 10 > > ************************************* > > CTL = 0x10 Reg. Domain = 58 > > Antenna Gain = 0 Reg. Max Antenna Gain = 0 > > Power Limit = 60 Reg. Max Power = 30 > > Num tx chains = 2 Num supported rates = 109 > > ******************************** > > > > > > So looks like reg ,domain is different even though both are US. > > (Although I didnt set anything on stock firmware. The countrycode from > > iwpriv get_countrycode says its 841.) > > > > Also, the antenna gain seems different between stock and openwrt firmware.. > > > > > > How to change the reg. domain like in stock firmware in openwrt > > although I set to US in the uci. > > > > root@OpenWrt:/sys# uci show | grep country > > uhttpd.defaults.country='ZZ' > > wireless.radio0.country='US' > > wireless.radio1.country='US' > > wireless.radio2.country='US' > > root@OpenWrt:/sys# > > > > Thanks > > > > > > On Mon, May 13, 2019 at 10:36 AM Sam Samy <to.swami1@xxxxxxxxx> wrote: > >> > >>> Probably it is a board-file and/or calibration data issue then. > >>> > >>> The debugfs 'ath10k/tpc_stats' file may show very low values? > >> > >> I am not sure if the values are right. Here is one of the 5Ghz radio stats: > >> > >> root@OpenWrt:/sys# cat ./kernel/debug/ieee80211/phy0/ath10k/tpc_stats > >> > >> ************************************* > >> TPC config for channel 5320 mode 10 > >> ************************************* > >> CTL = 0x10 Reg. Domain = 58 > >> Antenna Gain = 0 Reg. Max Antenna Gain = 0 > >> Power Limit = 46 Reg. Max Power = 46 > >> Num tx chains = 2 Num supported rates = 129 > >> ******************************** > >> ******************* CDD POWER TABLE **************** > >> ******************************** > >> No. Preamble Rate_code tpc_value0 tpc_value1 tpc_value2 tpc_value3 > >> 0 CCK 0x40 0 0 > >> 1 CCK 0x41 0 0 > >> 2 CCK 0x42 0 0 > >> 3 CCK 0x43 0 0 > >> 4 OFDM 0x 0 36 34 > >> 5 OFDM 0x 1 38 34 > >> 6 OFDM 0x 2 38 34 > >> 7 OFDM 0x 3 38 34 > >> 8 OFDM 0x 4 34 34 > >> 9 OFDM 0x 5 38 34 > >> 10 OFDM 0x 6 38 34 > >> 11 OFDM 0x 7 38 34 > >> 12 HT20 0x80 38 34 > >> 13 HT20 0x81 38 34 > >> 14 HT20 0x82 38 34 > >> 15 HT20 0x83 38 34 > >> 16 HT20 0x84 38 34 > >> 17 HT20 0x85 36 34 > >> 18 HT20 0x86 34 34 > >> 19 HT20 0x87 32 32 > >> 20 HT20 0x90 38 38 > >> 21 HT20 0x91 38 38 > >> 22 HT20 0x92 38 38 > >> 23 HT20 0x93 38 38 > >> 24 HT20 0x94 38 38 > >> 25 HT20 0x95 36 36 > >> 26 HT20 0x96 34 34 > >> 27 HT20 0x97 32 32 > >> 28 HT40 0x80 37 34 > >> 29 HT40 0x81 37 34 > >> 30 HT40 0x82 37 34 > >> 31 HT40 0x83 37 34 > >> 32 HT40 0x84 37 34 > >> 33 HT40 0x85 35 34 > >> 34 HT40 0x86 33 33 > >> 35 HT40 0x87 31 31 > >> 36 HT40 0x90 37 37 > >> 37 HT40 0x91 37 37 > >> 38 HT40 0x92 37 37 > >> 39 HT40 0x93 37 37 > >> 40 HT40 0x94 37 37 > >> 41 HT40 0x95 35 35 > >> 42 HT40 0x96 33 33 > >> 43 HT40 0x97 31 31 > >> 44 VHT20 0xc0 38 34 > >> 45 VHT20 0xc1 38 34 > >> 46 VHT20 0xc2 38 34 > >> 47 VHT20 0xc3 38 34 > >> 48 VHT20 0xc4 38 34 > >> 49 VHT20 0xc5 36 34 > >> 50 VHT20 0xc6 34 34 > >> 51 VHT20 0xc7 32 32 > >> 52 VHT20 0xc8 31 31 > >> 53 VHT20 0xc9 30 30 > >> 54 VHT20 0xd0 38 38 > >> 55 VHT20 0xd1 38 38 > >> 56 VHT20 0xd2 38 38 > >> 57 VHT20 0xd3 38 38 > >> 58 VHT20 0xd4 38 38 > >> 59 VHT20 0xd5 36 36 > >> 60 VHT20 0xd6 34 34 > >> 61 VHT20 0xd7 32 32 > >> 62 VHT20 0xd8 31 31 > >> 63 VHT20 0xd9 30 30 > >> 64 VHT40 0xc0 37 34 > >> 65 VHT40 0xc1 37 34 > >> 66 VHT40 0xc2 37 34 > >> 67 VHT40 0xc3 37 34 > >> 68 VHT40 0xc4 37 34 > >> 69 VHT40 0xc5 35 34 > >> 70 VHT40 0xc6 33 33 > >> 71 VHT40 0xc7 31 31 > >> 72 VHT40 0xc8 30 30 > >> 73 VHT40 0xc9 29 29 > >> 74 VHT40 0xd0 37 37 > >> 75 VHT40 0xd1 37 37 > >> 76 VHT40 0xd2 37 37 > >> 77 VHT40 0xd3 37 37 > >> 78 VHT40 0xd4 37 37 > >> 79 VHT40 0xd5 35 35 > >> 80 VHT40 0xd6 33 33 > >> 81 VHT40 0xd7 31 31 > >> 82 VHT40 0xd8 30 30 > >> 83 VHT40 0xd9 29 29 > >> 84 VHT80 0xc0 36 34 > >> 85 VHT80 0xc1 36 34 > >> 86 VHT80 0xc2 36 34 > >> 87 VHT80 0xc3 36 34 > >> 88 VHT80 0xc4 36 34 > >> 89 VHT80 0xc5 34 34 > >> 90 VHT80 0xc6 32 32 > >> 91 VHT80 0xc7 30 30 > >> 92 VHT80 0xc8 29 29 > >> 93 VHT80 0xc9 28 28 > >> 94 VHT80 0xd0 36 36 > >> 95 VHT80 0xd1 36 36 > >> 96 VHT80 0xd2 36 36 > >> 97 VHT80 0xd3 36 36 > >> 98 VHT80 0xd4 36 36 > >> 99 VHT80 0xd5 34 34 > >> 100 VHT80 0xd6 32 32 > >> 101 VHT80 0xd7 30 30 > >> 102 VHT80 0xd8 29 29 > >> 103 VHT80 0xd9 28 28 > >> 104 HTCUP 0x40 36 36 > >> 105 HTCUP 0x 0 36 34 > >> 106 HTCUP 0x40 36 36 > >> 107 HTCUP 0x 0 36 34 > >> 108 HTCUP 0x 0 36 34 > >> 109 HTCUP 0x7a 34 34 > >> 110 HTCUP 0x8a 32 32 > >> 111 HTCUP 0x a 30 30 > >> 112 HTCUP 0xee 27 27 > >> 113 HTCUP 0xa6 26 26 > >> 114 HTCUP 0x90 36 36 > >> 115 HTCUP 0x1d 36 36 > >> 116 HTCUP 0x80 36 34 > >> 117 HTCUP 0x41 36 36 > >> 118 HTCUP 0xd9 36 36 > >> 119 HTCUP 0x64 34 34 > >> 120 HTCUP 0xf9 32 32 > >> 121 HTCUP 0x 0 30 30 > >> 122 HTCUP 0x 0 27 27 > >> 123 HTCUP 0x 0 26 26 > >> 124 HTCUP 0x64 0 0 > >> 125 HTCUP 0x 0 37 34 > >> 126 HTCUP 0x31 0 0 > >> 127 HTCUP 0x 4 37 34 > >> 128 HTCUP 0x 0 38 34 > >> *********************************** > >> ******************************** > >> ******************* STBC POWER TABLE **************** > >> ******************************** > >> No. Preamble Rate_code tpc_value0 tpc_value1 tpc_value2 tpc_value3 > >> 0 CCK 0x40 0 0 > >> 1 CCK 0x41 0 0 > >> 2 CCK 0x42 0 0 > >> 3 CCK 0x43 0 0 > >> 4 OFDM 0x 0 36 36 > >> 5 OFDM 0x 1 38 38 > >> 6 OFDM 0x 2 38 38 > >> 7 OFDM 0x 3 38 38 > >> 8 OFDM 0x 4 34 34 > >> 9 OFDM 0x 5 38 38 > >> 10 OFDM 0x 6 38 38 > >> 11 OFDM 0x 7 38 38 > >> 12 HT20 0x80 38 38 > >> 13 HT20 0x81 38 38 > >> 14 HT20 0x82 38 38 > >> 15 HT20 0x83 38 38 > >> 16 HT20 0x84 38 38 > >> 17 HT20 0x85 36 36 > >> 18 HT20 0x86 34 34 > >> 19 HT20 0x87 32 32 > >> 20 HT20 0x90 38 38 > >> 21 HT20 0x91 38 38 > >> 22 HT20 0x92 38 38 > >> 23 HT20 0x93 38 38 > >> 24 HT20 0x94 38 38 > >> 25 HT20 0x95 36 36 > >> 26 HT20 0x96 34 34 > >> 27 HT20 0x97 32 32 > >> 28 HT40 0x80 37 37 > >> 29 HT40 0x81 37 37 > >> 30 HT40 0x82 37 37 > >> 31 HT40 0x83 37 37 > >> 32 HT40 0x84 37 37 > >> 33 HT40 0x85 35 35 > >> 34 HT40 0x86 33 33 > >> 35 HT40 0x87 31 31 > >> 36 HT40 0x90 37 37 > >> 37 HT40 0x91 37 37 > >> 38 HT40 0x92 37 37 > >> 39 HT40 0x93 37 37 > >> 40 HT40 0x94 37 37 > >> 41 HT40 0x95 35 35 > >> 42 HT40 0x96 33 33 > >> 43 HT40 0x97 31 31 > >> 44 VHT20 0xc0 38 38 > >> 45 VHT20 0xc1 38 38 > >> 46 VHT20 0xc2 38 38 > >> 47 VHT20 0xc3 38 38 > >> 48 VHT20 0xc4 38 38 > >> 49 VHT20 0xc5 36 36 > >> 50 VHT20 0xc6 34 34 > >> 51 VHT20 0xc7 32 32 > >> 52 VHT20 0xc8 31 31 > >> 53 VHT20 0xc9 30 30 > >> 54 VHT20 0xd0 38 38 > >> 55 VHT20 0xd1 38 38 > >> 56 VHT20 0xd2 38 38 > >> 57 VHT20 0xd3 38 38 > >> 58 VHT20 0xd4 38 38 > >> 59 VHT20 0xd5 36 36 > >> 60 VHT20 0xd6 34 34 > >> 61 VHT20 0xd7 32 32 > >> 62 VHT20 0xd8 31 31 > >> 63 VHT20 0xd9 30 30 > >> 64 VHT40 0xc0 37 37 > >> 65 VHT40 0xc1 37 37 > >> 66 VHT40 0xc2 37 37 > >> 67 VHT40 0xc3 37 37 > >> 68 VHT40 0xc4 37 37 > >> 69 VHT40 0xc5 35 35 > >> 70 VHT40 0xc6 33 33 > >> 71 VHT40 0xc7 31 31 > >> 72 VHT40 0xc8 30 30 > >> 73 VHT40 0xc9 29 29 > >> 74 VHT40 0xd0 37 37 > >> 75 VHT40 0xd1 37 37 > >> 76 VHT40 0xd2 37 37 > >> 77 VHT40 0xd3 37 37 > >> 78 VHT40 0xd4 37 37 > >> 79 VHT40 0xd5 35 35 > >> 80 VHT40 0xd6 33 33 > >> 81 VHT40 0xd7 31 31 > >> 82 VHT40 0xd8 30 30 > >> 83 VHT40 0xd9 29 29 > >> 84 VHT80 0xc0 36 36 > >> 85 VHT80 0xc1 36 36 > >> 86 VHT80 0xc2 36 36 > >> 87 VHT80 0xc3 36 36 > >> 88 VHT80 0xc4 36 36 > >> 89 VHT80 0xc5 34 34 > >> 90 VHT80 0xc6 32 32 > >> 91 VHT80 0xc7 30 30 > >> 92 VHT80 0xc8 29 29 > >> 93 VHT80 0xc9 28 28 > >> 94 VHT80 0xd0 36 36 > >> 95 VHT80 0xd1 36 36 > >> 96 VHT80 0xd2 36 36 > >> 97 VHT80 0xd3 36 36 > >> 98 VHT80 0xd4 36 36 > >> 99 VHT80 0xd5 34 34 > >> 100 VHT80 0xd6 32 32 > >> 101 VHT80 0xd7 30 30 > >> 102 VHT80 0xd8 29 29 > >> 103 VHT80 0xd9 28 28 > >> 104 HTCUP 0x40 36 36 > >> 105 HTCUP 0x 0 36 36 > >> 106 HTCUP 0x40 36 36 > >> 107 HTCUP 0x 0 36 36 > >> 108 HTCUP 0x 0 36 36 > >> 109 HTCUP 0x7a 34 34 > >> 110 HTCUP 0x8a 32 32 > >> 111 HTCUP 0x a 30 30 > >> 112 HTCUP 0xee 27 27 > >> 113 HTCUP 0xa6 26 26 > >> 114 HTCUP 0x90 36 36 > >> 115 HTCUP 0x1d 36 36 > >> 116 HTCUP 0x80 36 36 > >> 117 HTCUP 0x41 36 36 > >> 118 HTCUP 0xd9 36 36 > >> 119 HTCUP 0x64 34 34 > >> 120 HTCUP 0xf9 32 32 > >> 121 HTCUP 0x 0 30 30 > >> 122 HTCUP 0x 0 27 27 > >> 123 HTCUP 0x 0 26 26 > >> 124 HTCUP 0x64 0 0 > >> 125 HTCUP 0x 0 37 37 > >> 126 HTCUP 0x31 0 0 > >> 127 HTCUP 0x 4 37 37 > >> 128 HTCUP 0x 0 38 38 > >> *********************************** > >> TXBF not supported > >> *************************** > >> root@OpenWrt:/sys# > >> > >> > >> Thanks > >> > >> On Mon, May 13, 2019 at 10:27 AM Ben Greear <greearb@xxxxxxxxxxxxxxx> wrote: > >>> > >>> On 5/13/19 10:26 AM, Sam Samy wrote: > >>>> hi Ben, > >>>> > >>>>> Hello, what firmware are you using (ath10k-ct, or QCA?) If using -ct firmware, > >>>>> please try QCA firmware and let me know if that fixes the problem. > >>>>> > >>>> I tried both. Both have the same problem. I tried various versions > >>>> of the both(-ct and QCA) firmware as well. All have the same problem. > >>> > >>> Probably it is a board-file and/or calibration data issue then. > >>> > >>> The debugfs 'ath10k/tpc_stats' file may show very low values? > >>> > >>> Thanks, > >>> Ben > >>> > >>>> > >>>> Thanks > >>>> > >>>> On Mon, May 13, 2019 at 10:00 AM Ben Greear <greearb@xxxxxxxxxxxxxxx> wrote: > >>>>> > >>>>> On 5/13/19 9:56 AM, Sam Samy wrote: > >>>>>> Hi, > >>>>>> I installed master branch openwrt onto Asus MAP-AC2200 AP. It has tri > >>>>>> band. Its based on IPQ4019 DK04 QCA reference platform. 2 radios > >>>>>> (2Ghz/5Ghz) on AHB bus and one 5GHZ on PCIe bus. Its generally working > >>>>>> fine except one problem in 5Ghz. On both the 5Ghz radios the RSSI is > >>>>>> pretty low on any channel I put it in. In one feet range I see -60dB > >>>>>> RSSI, where as the stock firmware that came with the AP gives an RSSI > >>>>>> of -36dB at one foot distance.The downstream transmit rates are MCS8/9 > >>>>>> for most part. The 2Ghz is working fine. Its using the cal data from > >>>>>> the flash that came with the AP. > >>>>>> > >>>>>> Can you please suggest anyway to debug this or improve the RSSI? > >>>>>> > >>>>>> Thanks you! > >>>>>> > >>>>> > >>>>> Hello, what firmware are you using (ath10k-ct, or QCA?) If using -ct firmware, > >>>>> please try QCA firmware and let me know if that fixes the problem. > >>>>> > >>>>> Thanks, > >>>>> Ben > >>>>> > >>>>> -- > >>>>> Ben Greear <greearb@xxxxxxxxxxxxxxx> > >>>>> Candela Technologies Inc http://www.candelatech.com > >>>>> > >>>> > >>> > >>> > >>> -- > >>> Ben Greear <greearb@xxxxxxxxxxxxxxx> > >>> Candela Technologies Inc http://www.candelatech.com > >>> > > > > > -- > Ben Greear <greearb@xxxxxxxxxxxxxxx> > Candela Technologies Inc http://www.candelatech.com >
