On Fri, May 10, 2019 at 6:40 PM Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> wrote: > > (+Cc: Oleg) > > On Fri, May 10, 2019 at 09:43:29AM +0200, Sedat Dilek wrote: > > On Thu, May 9, 2019 at 3:46 PM Sedat Dilek <sedat.dilek@xxxxxxxxx> wrote: > > > > > > Hi, > > > > > > I am here on Debian/buster AMD64 and Linux v5.1 final. > > > > > > I have successfully installed and tested the NXP NFC driver from > > > Lenovo under Windows 10 as a first step (see [1] and [2]). > > > > > > As a testcase I used my YubiKey which was recognized via NFC and I > > > could automatically register at the YubiKey demo website. > > > > > > Under Linux v5.1 I have activated all sort of CONFIG_NFC_XXX as > > > modules if available (see below and attached files). > > > > > > I am not sure if I need to load the PN544 (I2C) driver? > > > > > > I can see in /sys ... > > > > > > # cd /sys/bus/i2c/devices/i2c-NXP1001:00 > > > > The NXP NFC Windows driver lists (I have both firmware files copied to Linux)... > > > [Firmware.CopyFiles] > > > NXPPN548FW.DAT > > > NXPPN547FW.DAT > > First of all it seems the driver lacks of ID. And the ID seems odd. > Looking for this ID in tables I see mention of NXP NPC100. The driver is > drivers/nfc/nxp-nci for it. > Hi Andy, what do you mean by "the driver lacks ID"? Do you mean VendorID and ProductID? How to get these informations? Do I need to modify the linux kernel sources? Thanks. Regards, - Sedat - > > > Last question: Do I need these firmware files installed? > > > Rename them? > > > Which directory - /lib/firmware? > > > > > > I ran out of ideas... > > > > > > Do you need more informations? > > > > > > I have attached my linux-config and the dmesg output. > > > > > > Thanks in advance. > > > > > > Kind regards, > > > - Sedat - > > > > > > [1] https://pcsupport.lenovo.com/us/de/products/laptops-and-netbooks/thinkpad-t-series-laptops/thinkpad-t470/downloads > > > [2] https://download.lenovo.com/pccbbs/mobiles/n1qnb04w.txt > > > [3] https://github.com/NXPNFCLinux/linux_libnfc-nci > > > [4] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/nfc/nfc-hci.txt > > > [5] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/nfc/nfc-pn544.txt > > > > > > P.S.: Some interesting outputs and files > > > > > > [ LINUX-CONFIG ] > > > > > > $ grep NFC /boot/config-5.1.0-1-amd64-cbl-asmgoto | sort > > > CONFIG_IP_VS_NFCT=y > > > CONFIG_MLX5_EN_RXNFC=y > > > CONFIG_NFC_DIGITAL=m > > > CONFIG_NFC_FDP_I2C=m > > > CONFIG_NFC_FDP=m > > > CONFIG_NFC_HCI=m > > > CONFIG_NFC=m > > > CONFIG_NFC_MEI_PHY=m > > > CONFIG_NFC_MICROREAD_I2C=m > > > CONFIG_NFC_MICROREAD=m > > > CONFIG_NFC_MICROREAD_MEI=m > > > CONFIG_NFC_MRVL_I2C=m > > > CONFIG_NFC_MRVL=m > > > CONFIG_NFC_MRVL_SPI=m > > > CONFIG_NFC_MRVL_UART=m > > > CONFIG_NFC_MRVL_USB=m > > > CONFIG_NFC_NCI=m > > > CONFIG_NFC_NCI_SPI=m > > > CONFIG_NFC_NCI_UART=m > > > CONFIG_NFC_NXP_NCI_I2C=m > > > CONFIG_NFC_NXP_NCI=m > > > CONFIG_NFC_PN533_I2C=m > > > CONFIG_NFC_PN533=m > > > CONFIG_NFC_PN533_USB=m > > > CONFIG_NFC_PN544_I2C=m > > > CONFIG_NFC_PN544=m > > > CONFIG_NFC_PN544_MEI=m > > > CONFIG_NFC_PORT100=m > > > CONFIG_NFC_S3FWRN5_I2C=m > > > CONFIG_NFC_S3FWRN5=m > > > CONFIG_NFC_SHDLC=y > > > CONFIG_NFC_SIM=m > > > CONFIG_NFC_ST21NFCA_I2C=m > > > CONFIG_NFC_ST21NFCA=m > > > CONFIG_NFC_ST95HF=m > > > CONFIG_NFC_ST_NCI_I2C=m > > > CONFIG_NFC_ST_NCI=m > > > CONFIG_NFC_ST_NCI_SPI=m > > > CONFIG_NFC_TRF7970A=m > > > # Near Field Communication (NFC) devices > > > > > > [ WINDOWS 10 INF DRIVER ] > > > > > > $ cat NxpNfcClientDriver.inf > > > ��; > > > ; NxpNfcClientDriver.inf > > > ; > > > > > > [Version] > > > Signature="$Windows NT$" > > > Class=Proximity > > > ClassGuid={5630831C-06C9-4856-B327-F5D32586E060} > > > Provider=%ManufacturerName% > > > CatalogFile=NxpNfcClientDriver.cat > > > DriverVer=03/30/2018,12.0.3.0 > > > > > > [Manufacturer] > > > %ManufacturerName%=Standard,NTamd64 > > > > > > [Standard.NTamd64] > > > %DeviceName%=MyDevice_Install,ACPI\NXP1000 > > > %DeviceName%=MyDevice_Install,ACPI\NXP1001 > > > %DeviceName%=MyDevice_Install,ACPI\NXP1002 > > > %DeviceName%=MyDevice_Install,ACPI\NXP1003 > > > %DeviceName%=MyDevice_Install,ACPI\NXP7471 > > > %DeviceName%=MyDevice_Install,ACPI\NXP8013 > > > %DeviceName%=MyDevice_Install,ACPI\NXP3001 > > > > > > [SourceDisksNames] > > > 1=%DiskName% > > > > > > [SourceDisksFiles] > > > NxpNfcClientDriver.dll=1 > > > NXPPN548FW.DAT=1 > > > NXPPN547FW.DAT=1 > > > > > > ; =================== UMDF Device ================================== > > > > > > [MyDevice_Install.NT] > > > CopyFiles=UMDriverCopy,Firmware.CopyFiles > > > AddReg=NxpNfpProviderProximityCustomValuesRegister > > > > > > [MyDevice_Install.NT.hw] > > > AddReg=NxpNfcClientDriver_AddReg > > > > > > [MyDevice_Install.NT.Services] > > > AddService=WUDFRd,0x000001fa,WUDFRD_ServiceInstall > > > > > > [MyDevice_Install.NT.CoInstallers] > > > AddReg=CoInstallers_AddReg > > > > > > [MyDevice_Install.NT.Wdf] > > > UmdfService=NxpNfcClientDriver,NxpNfcClientDriver_Install > > > UmdfServiceOrder=NxpNfcClientDriver > > > UmdfDirectHardwareAccess=AllowDirectHardwareAccess > > > UmdfFileObjectPolicy=AllowNullAndUnknownFileObjects > > > UmdfImpersonationLevel=Impersonation > > > > > > [NxpNfcClientDriver_Install] > > > UmdfLibraryVersion=2.0.0 > > > ServiceBinary=%12%\UMDF\NxpNfcClientDriver.dll > > > UmdfExtensions=NfcCx0102 > > > > > > [NxpNfcClientDriver_AddReg] > > > HKR,FirmwareMap,"8",0x00020000,"%%SystemRoot%%\System32\NXPPN547FW.dat" > > > ; HW version of PN547 is 8 > > > HKR,FirmwareMap,"10",0x00020000,"%%SystemRoot%%\System32\NXPPN548FW.dat" > > > ; HW version of PN548 is 10 > > > HKR,NxpNfcClientDriver, "RfConfigData", 0x00000001, 00 > > > HKR,NxpNfcClientDriver, "EEPROMConfigBlob", 0x00000001, 00 > > > HKR,NxpNfcClientDriver, "RfSessionMgmt", 0x00010001, 1 > > > HKR,NxpNfcClientDriver, "KeepRfData", 0x00010001, 1 > > > > > > ; ============== custom registry sections ================== > > > > > > [NxpNfpProviderProximityCustomValuesRegister] > > > HKLM,"SYSTEM\CurrentControlSet\Proximity\","Dummy",0x00000010,0 > > > > > > > > > [NxpNfpProviderProximityCustomValuesRegister.Security] > > > "D:P(A;OICI;GA;;;LS)(A;;GA;;;BA)(A;;GA;;;SY)" > > > > > > [WUDFRD_ServiceInstall] > > > DisplayName=%WudfRdDisplayName% > > > ServiceType=1 > > > StartType=3 > > > ErrorControl=1 > > > ServiceBinary=%12%\WUDFRd.sys > > > > > > [CoInstallers_AddReg] > > > HKR,,CoInstallers32,0x00010000,"WUDFCoinstaller.dll" > > > > > > > > > [DestinationDirs] > > > UMDriverCopy=12,UMDF ; copy to Drivers\UMDF > > > Firmware.CopyFiles=11 > > > > > > [UMDriverCopy] > > > NxpNfcClientDriver.dll,,,0x100 > > > > > > [Firmware.CopyFiles] > > > NXPPN548FW.DAT > > > NXPPN547FW.DAT > > > > > > [ControlFlags] > > > ExcludeFromSelect=* > > > > > > ; =================== Generic ================================== > > > > > > [Strings] > > > ManufacturerName="NXP Semiconductors" > > > DiskName="NxpNfcClientDriver Installation Disk" > > > WudfRdDisplayName="NxpNfcClientDriver" > > > DeviceName="NxpNfcClientDriver" > > > > > > - EOT - > > > > [ CC Cristian and Jeremy of NXP ] > > > > What Linux-kernel configs do I need that PN544 I2C NFC driver works? > > > > Additionally, I have set CONFIG_I2C_GPIO=m. > > > > What else is important to be activated? > > > > Thanks. > > > > - Sedat - > > > > -- > With Best Regards, > Andy Shevchenko > >
