Search Linux Wireless

[PATCH V2 2/2] brcmfmac: send port authorized event for FT-802.1X

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Chung-Hsien Hsu <stanley.hsu@xxxxxxxxxxx>

With FT-802.1X, driver should send a port authorized event right after
sending a roamed event. It is used to indicate that a new AP is already
authorized so 802.1X is not required.

Acked-by: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
Signed-off-by: Chung-Hsien Hsu <stanley.hsu@xxxxxxxxxxx>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@xxxxxxxxxxx>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 8 ++++++++
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h | 1 +
 2 files changed, 9 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index 8ee8af4e7ec4..549efb91933c 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -1634,6 +1634,7 @@ brcmf_set_key_mgmt(struct net_device *ndev, struct cfg80211_connect_params *sme)
 	u16 count;
 
 	profile->use_fwsup = BRCMF_PROFILE_FWSUP_NONE;
+	profile->is_ft = false;
 
 	if (!sme->crypto.n_akm_suites)
 		return 0;
@@ -1678,11 +1679,13 @@ brcmf_set_key_mgmt(struct net_device *ndev, struct cfg80211_connect_params *sme)
 			break;
 		case WLAN_AKM_SUITE_FT_8021X:
 			val = WPA2_AUTH_UNSPECIFIED | WPA2_AUTH_FT;
+			profile->is_ft = true;
 			if (sme->want_1x)
 				profile->use_fwsup = BRCMF_PROFILE_FWSUP_1X;
 			break;
 		case WLAN_AKM_SUITE_FT_PSK:
 			val = WPA2_AUTH_PSK | WPA2_AUTH_FT;
+			profile->is_ft = true;
 			break;
 		default:
 			bphy_err(drvr, "invalid cipher group (%d)\n",
@@ -5557,6 +5560,11 @@ brcmf_bss_roaming_done(struct brcmf_cfg80211_info *cfg,
 	cfg80211_roamed(ndev, &roam_info, GFP_KERNEL);
 	brcmf_dbg(CONN, "Report roaming result\n");
 
+	if (profile->use_fwsup == BRCMF_PROFILE_FWSUP_1X && profile->is_ft) {
+		cfg80211_port_authorized(ndev, profile->bssid, GFP_KERNEL);
+		brcmf_dbg(CONN, "Report port authorized\n");
+	}
+
 	set_bit(BRCMF_VIF_STATUS_CONNECTED, &ifp->vif->sme_state);
 	brcmf_dbg(TRACE, "Exit\n");
 	return err;
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
index 9a6287f084a9..6a7dec908b6f 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
@@ -133,6 +133,7 @@ struct brcmf_cfg80211_profile {
 	struct brcmf_cfg80211_security sec;
 	struct brcmf_wsec_key key[BRCMF_MAX_DEFAULT_KEYS];
 	enum brcmf_profile_fwsup use_fwsup;
+	bool is_ft;
 };
 
 /**
-- 
2.1.0





[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux