When test simulate firmware crash, it is easy to trigger error.
command:
echo soft > /sys/kernel/debug/ieee80211/phyxx/ath10k/simulate_fw_crash.
If input more than two times continuously, then it will have error.
Error message:
ath10k_pci 0000:02:00.0: failed to set vdev 1 RX wake policy: -108
ath10k_pci 0000:02:00.0: device is wedged, will not restart
It is because the state has not changed to ATH10K_STATE_ON immediately,
then it will have more than two simulate crash process running meanwhile,
and complete/wakeup some field twice, it destroy the normal recovery
process.
add flag wait-ready for this command:
echo soft wait-ready > /sys/kernel/debug/ieee80211/phyxx/ath10k/simulate_fw_crash
Tested with QCA6174 PCI with firmware
WLAN.RM.4.4.1-00109-QCARMSWPZ-1, but this will also affect QCA9377 PCI.
It's not a regression with new firmware releases.
Signed-off-by: Wen Gong <wgong@xxxxxxxxxxxxxx>
---
v2: add wait-ready flag
drivers/net/wireless/ath/ath10k/debug.c | 25 ++++++++++++++++++-------
1 file changed, 18 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index 15964b3..04a20b8 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -534,7 +534,8 @@ static ssize_t ath10k_read_simulate_fw_crash(struct file *file,
"`soft` - this will send WMI_FORCE_FW_HANG_ASSERT to firmware if FW supports that command.\n"
"`hard` - this will send to firmware command with illegal parameters causing firmware crash.\n"
"`assert` - this will send special illegal parameter to firmware to cause assert failure and crash.\n"
- "`hw-restart` - this will simply queue hw restart without fw/hw actually crashing.\n";
+ "`hw-restart` - this will simply queue hw restart without fw/hw actually crashing.\n"
+ "`soft wait-ready` `hard wait-ready` `assert wait-ready` `hw-restart wait-ready` - cmd only execuate when state is ATH10K_STATE_ON.\n";
return simple_read_from_buffer(user_buf, count, ppos, buf, strlen(buf));
}
@@ -554,6 +555,9 @@ static ssize_t ath10k_write_simulate_fw_crash(struct file *file,
char buf[32] = {0};
ssize_t rc;
int ret;
+ char buf_cmd[32] = {0};
+ char buf_flag[32] = {0};
+ bool wait_ready;
/* filter partial writes and invalid commands */
if (*ppos != 0 || count >= sizeof(buf) || count == 0)
@@ -567,18 +571,25 @@ static ssize_t ath10k_write_simulate_fw_crash(struct file *file,
if (buf[*ppos - 1] == '\n')
buf[*ppos - 1] = '\0';
+ sscanf(buf, "%s %s", buf_cmd, buf_flag);
+ ath10k_info(ar, "buf_cmd:%s, buf_flag:%s\n", buf_cmd, buf_flag);
+
+ wait_ready = !strcmp(buf_cmd, "wait-ready");
mutex_lock(&ar->conf_mutex);
- if (ar->state != ATH10K_STATE_ON &&
- ar->state != ATH10K_STATE_RESTARTED) {
+ if ((!wait_ready &&
+ ar->state != ATH10K_STATE_ON &&
+ ar->state != ATH10K_STATE_RESTARTED) ||
+ (wait_ready &&
+ ar->state != ATH10K_STATE_ON)) {
ret = -ENETDOWN;
goto exit;
}
- if (!strcmp(buf, "soft")) {
+ if (!strcmp(buf_cmd, "soft")) {
ath10k_info(ar, "simulating soft firmware crash\n");
ret = ath10k_wmi_force_fw_hang(ar, WMI_FORCE_FW_HANG_ASSERT, 0);
- } else if (!strcmp(buf, "hard")) {
+ } else if (!strcmp(buf_cmd, "hard")) {
ath10k_info(ar, "simulating hard firmware crash\n");
/* 0x7fff is vdev id, and it is always out of range for all
* firmware variants in order to force a firmware crash.
@@ -586,10 +597,10 @@ static ssize_t ath10k_write_simulate_fw_crash(struct file *file,
ret = ath10k_wmi_vdev_set_param(ar, 0x7fff,
ar->wmi.vdev_param->rts_threshold,
0);
- } else if (!strcmp(buf, "assert")) {
+ } else if (!strcmp(buf_cmd, "assert")) {
ath10k_info(ar, "simulating firmware assert crash\n");
ret = ath10k_debug_fw_assert(ar);
- } else if (!strcmp(buf, "hw-restart")) {
+ } else if (!strcmp(buf_cmd, "hw-restart")) {
ath10k_info(ar, "user requested hw restart\n");
queue_work(ar->workqueue, &ar->restart_work);
ret = 0;
--
1.9.1
