John Crispin <john@xxxxxxxxxxx> writes: > On 10/04/2019 17:31, Kalle Valo wrote: >> John Crispin <john@xxxxxxxxxxx> writes: >> >>> From: Vasanthakumar Thiagarajan <vthiagar@xxxxxxxxxxxxxxxx> >>> >>> This patch adds support for ethernet rxtx mode to the driver. The feature >>> is enabled via a new module parameter. If enabled to driver will enable >>> the feature on a per vif basis if all other requirements were met. >>> >>> Testing on a IPQ4019 based hardware shows a increase in TCP throughput >>> of ~20% when the feature is enabled. >>> >>> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@xxxxxxxxxxxxxxxx> >>> Signed-off-by: John Crispin <john@xxxxxxxxxxx> >> Looks good to me. >> >> BTW, for ath10k patches (patchsets including ath10k patches) please try >> to CC also the ath10k list. Easier to find ath10k patches that way. >> > Hi, > > Thanks Kalle, I'll be sending a V5 tomorrow with a small improvement > on the hw crypto part, that unbreaks wpa3. can I add your Acked-by on > the ath10k part ? Adding my Acked-by is not necessary as I will be applying the ath10k patch anyway. In these cases we usually do so that Johannes applies the mac80211 part, he then assigns the driver patches to me in patchwork, and once mac80211 commits are in my tree, I'll apply the driver part. -- Kalle Valo
