From: Ondrej Jirman <megous@xxxxxxxxxx> This series implements support for Xunlong Orange Pi 3 board. Unfortunately, this board needs some small driver patches, so I have split the boards DT patch into chunks that require patches for drivers in various subsystems. Suggested merging plan/dependencies: - Pinctrl and stmmac patches are needed for ethernet support. (patches 1-5) - HDMI support was changed, please review. (patches 6-8) - brcmfmac patch 9, fixing firmware file selection, can be merged now, after review, as it doesn't depend on anything (please review :)) - mmc1 pinconf (patch 10) can probably be merged now, too (it will certainly be used soon by all the other WiFi featuring boards based on H6) - WiFi dts patch will have to wait for H6 RTC patches, which in turn depend on ChenYu's RTC series, to be merged. That will take a while yet. I'm just keeping it in the series for completness. (patch 11) This patch is also needed to not get segfault on boot (it was already merged): https://lkml.org/lkml/2019/4/5/856 Changes in v2: - added dt-bindings documentation for the board's compatible string (suggested by Clement) - addressed checkpatch warnings and code formatting issues (on Maxime's suggestions) - stmmac: dropped useless parenthesis, reworded description of the patch (suggested by Sergei) - drop useles dev_info() about the selected io bias voltage - docummented io voltage bias selection variant macros - wifi: marked WiFi DTS patch and realted mmc1_pins as "DO NOT MERGE", because wifi depends on H6 RTC support that's not merged yet (suggested by Clement) - added missing signed-of-bys - changed &usb2otg dr_mode to otg, and added a note about VBUS - improved wording of HDMI driver's DDC power supply patch Changes in v3: - dropped already applied patches - changed pinctrl I/O bias selection constants to enum and renamed - added /omit-if-no-ref/ to mmc1_pins - made mmc1_pins default pinconf for mmc1 in H6 dtsi - move ddc-supply to HDMI connector node, updated patch descriptions, changed dt-bindings docs Please take a look. thank you and regards, Ondrej Jirman Icenowy Zheng (2): net: stmmac: sun8i: add support for Allwinner H6 EMAC net: stmmac: sun8i: force select external PHY when no internal one Ondrej Jirman (9): pinctrl: sunxi: Prepare for alternative bias voltage setting methods pinctrl: sunxi: Support I/O bias voltage setting on H6 arm64: dts: allwinner: orange-pi-3: Enable ethernet dt-bindings: display: hdmi-connector: Add DDC power supply drm: sun4i: Add support for enabling DDC I2C bus power to dw_hdmi glue arm64: dts: allwinner: orange-pi-3: Enable HDMI output brcmfmac: Loading the correct firmware for brcm43456 arm64: dts: allwinner: h6: Add MMC1 pins [DO NOT MERGE] arm64: dts: allwinner: orange-pi-3: Enable WiFi .../display/connector/hdmi-connector.txt | 1 + .../dts/allwinner/sun50i-h6-orangepi-3.dts | 127 ++++++++++++++++++ arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 11 ++ drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c | 60 ++++++++- drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h | 2 + .../net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 21 +++ .../broadcom/brcm80211/brcmfmac/sdio.c | 4 +- drivers/pinctrl/sunxi/pinctrl-sun50i-h6.c | 1 + drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c | 2 +- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 56 +++++--- drivers/pinctrl/sunxi/pinctrl-sunxi.h | 14 +- 11 files changed, 275 insertions(+), 24 deletions(-) -- 2.21.0
