Search Linux Wireless

Re: [linux-sunxi] Re: [PATCH 02/12] drm: sun4i: Add support for enabling DDC I2C bus to dw_hdmi glue

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Apr 08, 2019 at 03:28:24PM +0800, Chen-Yu Tsai wrote:
> On Mon, Apr 8, 2019 at 3:23 PM Maxime Ripard <maxime.ripard@xxxxxxxxxxx> wrote:
> >
> > On Sat, Apr 06, 2019 at 01:45:04AM +0200, megous@xxxxxxxxxx wrote:
> > > From: Ondrej Jirman <megous@xxxxxxxxxx>
> > >
> > > Orange Pi 3 board requires enabling DDC I2C bus via some GPIO connected
> > > transistors, before it can be used. Model this as a power supply for DDC
> > > (via regulator framework).
> > >
> > > Signed-off-by: Ondrej Jirman <megous@xxxxxxxxxx>
> >
> > The DDC bus itself is usually attached to the HDMI connector, so it
> > would make sense to make the supply also a property of the connector.
>
> I believe these are separate things. What this patch covers is power for
> a voltage shifter between the SoC and HDMI DDC pins. The HDMI connector's
> 5V supply to power the remote DDC chip is something else. And on the
> Orange Pi 3 they are indeed separate supplies.

Then maybe the endpoint link between the two would be the best place
to put this?

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux