Search Linux Wireless

Re: [PATCH 07/12] arm64: dts: allwinner: orange-pi-3: Enable ethernet

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Apr 6, 2019 at 5:15 AM <megous@xxxxxxxxxx> wrote:
>
> From: Ondrej Jirman <megous@xxxxxxxxxx>
>
> Orange Pi 3 has two regulators that power the Realtek RTL8211E.
> According to the phy datasheet, both regulators need to be enabled
> at the same time, but we can only specify a single phy-supply in
> the DT.
>
> This can be achieved by making one regulator depedning on the
> other via vin-supply. While it's not a technically correct
> description of the hardware, it achieves the purpose.
>
> All values of RX/TX delay were tested exhaustively and a middle
> one of the working values was chosen.
>
> Signed-off-by: Ondrej Jirman <megous@xxxxxxxxxx>
> ---
>  .../dts/allwinner/sun50i-h6-orangepi-3.dts    | 44 +++++++++++++++++++
>  1 file changed, 44 insertions(+)

This was in ML[1], I thought this change would already merged. I
remember Chen-Yu applied and revert due to emac node not mainlined at
that time.

[1] https://patchwork.kernel.org/patch/10558281/



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux