Hi, On Sat, 6 Apr 2019 at 01:45, megous via linux-sunxi <linux-sunxi@xxxxxxxxxxxxxxxx> wrote: > > From: Ondrej Jirman <megous@xxxxxxxxxx> > > This series implements support for Xunlong Orange Pi 3 board. OrangePi 3 Lite2 and One Plus boards support has already been merged. The support is not complete but you should rebase your patches on top of sunxi/for-next https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git/tree/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi?h=sunxi/for-next Regards, Clement > > Unfortunately, this board needs some small driver patches, so I have > split the boards DT patch into chunks that require patches for drivers > in various subsystems: > > - Basic DT for the board (patch 1) > - HDMI support (patches 2, 3, 4) > - Ethernet support (patches 5, 6, 7) > - WiFi support (patches 8, 9, 10, 11, 12) > > This patch is also needed to not get segfault on boot: > https://lkml.org/lkml/2019/4/5/856 > > Please take a look. > > regards, > Ondrej Jirman > > Icenowy Zheng (2): > net: stmmac: sun8i: add support for Allwinner H6 EMAC > net: stmmac: sun8i: force select external PHY when no internal one > > Ondrej Jirman (10): > arm64: dts: allwinner: h6: Add Orange Pi 3 DTS > drm: sun4i: Add support for enabling DDC I2C bus to dw_hdmi glue > dt-bindings: display: sun4i-drm: Add DDC power supply > arm64: dts: allwinner: orange-pi-3: Enable HDMI output > arm64: dts: allwinner: orange-pi-3: Enable ethernet > arm64: dts: allwinner: h6: Add MMC1 pins > pinctrl: sunxi: Prepare for alternative bias voltage setting methods > pinctrl: sunxi: Support I/O bias voltage setting on H6 > brcmfmac: Loading the correct firmware for brcm43456 > arm64: dts: allwinner: orange-pi-3: Enable WiFi > > .../bindings/display/sunxi/sun4i-drm.txt | 1 + > arch/arm64/boot/dts/allwinner/Makefile | 1 + > .../dts/allwinner/sun50i-h6-orangepi-3.dts | 339 ++++++++++++++++++ > arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 9 + > drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c | 17 +- > drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h | 1 + > .../net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 22 ++ > .../broadcom/brcm80211/brcmfmac/sdio.c | 4 +- > drivers/pinctrl/sunxi/pinctrl-sun50i-h6.c | 1 + > drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c | 2 +- > drivers/pinctrl/sunxi/pinctrl-sunxi.c | 50 ++- > drivers/pinctrl/sunxi/pinctrl-sunxi.h | 7 +- > 12 files changed, 433 insertions(+), 21 deletions(-) > create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts > > -- > 2.21.0 > > -- > You received this message because you are subscribed to the Google Groups "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@xxxxxxxxxxxxxxxx. > For more options, visit https://groups.google.com/d/optout.
