Search Linux Wireless

Re: [PATCH 2/2] rt2x00: enable experimental MFP with HW crypt

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Mar 26, 2019 at 02:54:25AM +0100, Tom Psyborg wrote:
> On 25/03/2019, Stanislaw Gruszka <sgruszka@xxxxxxxxxx> wrote:
> > On Thu, Mar 14, 2019 at 03:02:14PM +0100, Tom Psyborg wrote:
> >> On 13/03/2019, Stanislaw Gruszka <sgruszka@xxxxxxxxxx> wrote:
> >>
> >> >
> >> > There should be no difference between enabling MFP with nohwcrypt and
> >> > without nohwcrypt,
> >>
> >> well there is. do you still want me to resend this with MFP enabled
> >> unconditionally for all chips?
> >
> > Please share your hostapd config file with MFP enabled.
> >
> > Stanislaw
> >
> >
> 
> ctrl_interface=/var/run/wpa_supplicant
> eapol_version=1
> ap_scan=1
> fast_reauth=1
> pmf=2
> network={
> 	ssid="OpenWrt"
> 	proto=WPA2
> 	key_mgmt=WPA-PSK
> 	pairwise=CCMP
> 	group=CCMP
> 	ieee80211w=2
> 	psk="u7e5hwh46uz7ergv"
> 	wpa_ptk_rekey=60
> }

This is supplicant config, I asked for hostapd. You can find it in
/tmp/run/hostapd-phy0.conf (I assume you use openwrt on QCA router,
or you use proprietary firmware ?).

Stanislaw



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux