Search Linux Wireless

Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

> Stanislaw Gruszka <sgruszka@xxxxxxxxxx> hat am 20. Februar 2019 um 17:32 geschrieben:
> 
> 
> On Wed, Feb 20, 2019 at 05:22:18PM +0100, Lorenzo Bianconi wrote:
> > > On Wed, Feb 20, 2019 at 02:22:08PM +0100, Lorenzo Bianconi wrote:
> > > > > On Tue, Feb 19, 2019 at 01:19:26PM +0100, Felix Fietkau wrote:
> > > > > > >> >> The way I see it, we have two choices.
> > > > > > >> >> 1. Fix dwc2 to do its alignment quirk for the urb->sg != NULL case
> > > > > > >> >> 2. Rely on urb->transfer_buffer and keep urb->sg NULL
> > > > > > >> > 
> > > > > > >> > I agree, if this is only needed for dwc2. Though I would investigate
> > > > > > >> > if this is not a bug on other platforms as well.
> > > > > > >> >From what I can see, using Lorenzo's patches seems to be the better
> > > > > > >> solution, since they avoid these corner cases in dwc2 (and maybe other
> > > > > > >> drivers as well). I will apply them and then we'll see if we need to do
> > > > > > >> any further improvements later on.
> > > > > > > 
> > > > > > > They work on rpi dwc2, but they do not address root of the problem.
> > > > > > > There is clearly something wrong how mt76usb handle SG, what is not
> > > > > > > fixed. And adding disable_usb_sg module parameter for hcd's supporting
> > > > > > > SG should be red flag.
> > > > > > I think we're simply dealing with multiple issues here, only some of
> > > > > > which are fixed by Lorenzo's patches.
> > > > > > I'm pretty sure it's still wrong for mt76 to try to align its buffers,
> > > > > > since the Linux USB API supports non-aligned transfer buffers and it
> > > > > > should be up to the controller driver to deal with that.
> > > > > 
> > > > > Agree.
> > > > > 
> > > > > > dwc2 tries to do that, but that has limitations which I already pointed
> > > > > > out and which are properly dealt with by Lorenzo's patches.
> > > > > 
> > > > > I planed to just accept current solution, but I started to work on patch
> > > > > that remove len, sglen arguments from mt76u_buf_alloc() and use
> > > > > q->buf_size and SKB_WITH_OVERHEAD(q->buf_size) directly and realized how
> > > > > related code is now tangled.
> > > > > 
> > > > > Would be ok to send this patch with proper changelog as fix for RPI
> > > > > against wireless-drivers and cc:stable (assuming it works and really
> > > > > fix things on RPI) and revert Lorenzo's patches in -next ?
> > > > 
> > > > Hi Stanislaw,
> > > > 
> > > > what is the advantage of doing so?
> > > To have small fix proper for -stable to fix the problem in 4.20 and 4.19,
> > > and have simpler code.
> > 
> > merging the series I sent we will have a pretty simple approach, just a
> > single routine that allocates the rx buffers in the control path according to
> > the operating mode.
> 

FWIW i tested current linux-next and it also works with arm64/defconfig on Raspberry Pi 3B.

Thanks

> 
> Stanislaw



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux