Hi Marc,
On Sun, Feb 24, 2019 at 02:04:25PM +0000, Marc Zyngier wrote:
> The mwifiex driver makes unsafe assumptions about the state of the
> wake-up interrupt. It requests it and only then disable it. Of
> course, the interrupt may be screaming for whatever reason at that
> time, and the handler will then be called without the interrupt
> having been registered with the PM/wakeup subsystem. Oops.
>
> The right way to handle this kind of situation is to flag the
> interrupt with IRQ_NOAUTOEN before requesting it. It will then
> stay disabled until someone (the wake-up subsystem) enables it.
>
> Signed-off-by: Marc Zyngier <marc.zyngier@xxxxxxx>
This could be:
Fixes: 853402a00823 ("mwifiex: Enable WoWLAN for both sdio and pcie")
although, that was just borrowing the existing antipattern from SDIO
code..
Reviewed-by: Brian Norris <briannorris@xxxxxxxxxxxx>
Thanks.
> ---
> drivers/net/wireless/marvell/mwifiex/main.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/net/wireless/marvell/mwifiex/main.c b/drivers/net/wireless/marvell/mwifiex/main.c
> index 2105c2b7c627..82cf35e50579 100644
> --- a/drivers/net/wireless/marvell/mwifiex/main.c
> +++ b/drivers/net/wireless/marvell/mwifiex/main.c
> @@ -1610,6 +1610,7 @@ static void mwifiex_probe_of(struct mwifiex_adapter *adapter)
> "wake-up interrupt outside 'wake-up' subnode of %pOF\n",
> adapter->dt_node);
>
> + irq_set_status_flags(adapter->irq_wakeup, IRQ_NOAUTOEN);
> ret = devm_request_irq(dev, adapter->irq_wakeup,
> mwifiex_irq_wakeup_handler, IRQF_TRIGGER_LOW,
> "wifi_wake", adapter);
> @@ -1619,7 +1620,6 @@ static void mwifiex_probe_of(struct mwifiex_adapter *adapter)
> goto err_exit;
> }
>
> - disable_irq(adapter->irq_wakeup);
> if (device_init_wakeup(dev, true)) {
> dev_err(dev, "fail to init wakeup for mwifiex\n");
> goto err_exit;
> --
> 2.20.1
>
