From: Rafał Miłecki <rafal@xxxxxxxxxx>
This improves handling PCIe firmware halts by printing a clear error
message and replaces a similar code in the SDIO bus support.
It will also allow further improvements like trying to recover from a
firmware crash.
Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h | 2 ++
.../net/wireless/broadcom/brcm80211/brcmfmac/core.c | 10 ++++++++++
.../net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 2 +-
.../net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 4 ++--
4 files changed, 15 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
index 3d441c5c745c..801106583ae7 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
@@ -262,6 +262,8 @@ void brcmf_detach(struct device *dev);
void brcmf_dev_reset(struct device *dev);
/* Request from bus module to initiate a coredump */
void brcmf_dev_coredump(struct device *dev);
+/* Indication that firmware has halted or crashed */
+void brcmf_fw_crashed(struct device *dev);
/* Configure the "global" bus state used by upper layers */
void brcmf_bus_change_state(struct brcmf_bus *bus, enum brcmf_bus_state state);
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
index 4fbe8791f674..7f4d9356b79e 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
@@ -1273,6 +1273,16 @@ void brcmf_dev_coredump(struct device *dev)
brcmf_dbg(TRACE, "failed to create coredump\n");
}
+void brcmf_fw_crashed(struct device *dev)
+{
+ struct brcmf_bus *bus_if = dev_get_drvdata(dev);
+ struct brcmf_pub *drvr = bus_if->drvr;
+
+ bphy_err(drvr, "Firmware has halted or crashed\n");
+
+ brcmf_dev_coredump(dev);
+}
+
void brcmf_detach(struct device *dev)
{
s32 i;
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
index 39f6421885f6..cfa34672315f 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -730,7 +730,7 @@ static void brcmf_pcie_handle_mb_data(struct brcmf_pciedev_info *devinfo)
}
if (dtoh_mb_data & BRCMF_D2H_DEV_FWHALT) {
brcmf_dbg(PCIE, "D2H_MB_DATA: FW HALT\n");
- brcmf_dev_coredump(&devinfo->pdev->dev);
+ brcmf_fw_crashed(&devinfo->pdev->dev);
}
}
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index 4d104ab80fd8..a06af0cd4a7f 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -1090,8 +1090,8 @@ static u32 brcmf_sdio_hostmail(struct brcmf_sdio *bus)
/* dongle indicates the firmware has halted/crashed */
if (hmb_data & HMB_DATA_FWHALT) {
- brcmf_err("mailbox indicates firmware halted\n");
- brcmf_dev_coredump(&sdiod->func1->dev);
+ brcmf_dbg(SDIO, "mailbox indicates firmware halted\n");
+ brcmf_fw_crashed(&sdiod->func1->dev);
}
/* Dongle recomposed rx frames, accept them again */
--
2.20.1
