On Monday, 25 February 2019 21:00:38 CET Sven Eckelmann wrote:
[...]
> Tested-by: Sven Eckelmann <sven@xxxxxxxxxxxxx>
>
> Was tested on QCA988X with 10.2.4-1.0-00041
I just wanted to test it with 802.11s setup on IPQ4019 with 10.4-3.5.3-00057
and QCA9888 with 10.4-3.5.3-00053 (ath10k-firmware) and 10.4-3.6-00140
(linux-firmware 2018-12-16-211de167) for both. But it looks like the firmware
always crashes with and without this patch and 11s.
[ 221.620803] ath10k_pci 0000:01:00.0: wmi command 36967 timeout, restarting hardware
[ 221.744056] ieee80211 phy0: Hardware restart was requested
[ 225.130829] ath10k_pci 0000:01:00.0: failed to receive control response completion, polling..
[ 226.170824] ath10k_pci 0000:01:00.0: Service connect timeout
[ 226.170871] ath10k_pci 0000:01:00.0: failed to connect htt (-110)
[ 226.252248] ath10k_pci 0000:01:00.0: Could not init core: -110
If i count correctly, this is WMI_10_4_GPIO_CONFIG_CMDID. Not really supported
by upstream but it looks like there is an Openwrt private patch (not yet
accepted upstream [1])
package/kernel/mac80211/patches/ath/974-ath10k_add-LED-and-GPIO-controlling-support-for-various-chipsets.patch
which I have now removed to fix this problem for me.
The tests with 10.4-3.6-00140 and 10.4-3.5.3-* worked fine without this patch.
@Kalle are you expecting that he resents the patch again or can you just
append this information to the commit message? At least it looks at the moment
like there will be no new patch in the near future. But the
commit cd93b83ad92 ("ath10k: support for multicast rate control") is breaking
real world setups.
Kind regards,
Sven
[1] https://patchwork.kernel.org/patch/10327075/Attachment:
signature.asc
Description: This is a digitally signed message part.
