Introduce NL80211_ATTR_TID_CONFIG_AMPDU_CTRL in nl80211_attr_tid_config
to accept TID specific AMPDU aggregation enable/disable configuration
through NL80211_CMD_SET_TID_CONFIG command. TID for which the
aggregation control configuration is to be applied is passed in
NL80211_ATTR_TID_CONFIG_TID attribute. When the user-space wants this
configuration peer specific rather than being applied for all the
connected stations, MAC address of the peer can be passed in
NL80211_ATTR_MAC attribute.
Driver supporting this feature should advertise
NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL and supporting per-STA data TID
ampdu configuration should advertise NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL.
Signed-off-by: Tamizh chelvam <tamizhr@xxxxxxxxxxxxxx>
---
include/net/cfg80211.h | 3 +++
include/uapi/linux/nl80211.h | 22 ++++++++++++++++++++++
net/wireless/nl80211.c | 15 +++++++++++++++
3 files changed, 40 insertions(+)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 55c4ddf..fcf33c9 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -512,6 +512,7 @@ struct cfg80211_chan_def {
enum ieee80211_tid_conf_mask {
IEEE80211_TID_CONF_NOACK = BIT(0),
IEEE80211_TID_CONF_RETRY = BIT(1),
+ IEEE80211_TID_CONF_AMPDU = BIT(2),
};
/**
@@ -522,6 +523,7 @@ enum ieee80211_tid_conf_mask {
* @noack: noack configuration value for the TID
* @retry_long: retry count value
* @retry_short: retry count value
+ * @ampdu: Enable/Disable aggregation
*/
struct ieee80211_tid_cfg {
u8 tid;
@@ -529,6 +531,7 @@ struct ieee80211_tid_cfg {
u8 noack;
int retry_long;
int retry_short;
+ u8 ampdu;
};
/**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index f2ce845..f94651d 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -4615,6 +4615,21 @@ enum nl80211_tid_config {
* the max value should be advertised by the driver through
* max_data_retry_count. when this attribute is not present, the driver
* would use the default configuration.
+ * @NL80211_ATTR_TID_CONFIG_AMPDU_CTRL: Enable/Disable aggregation for the TID
+ * specified in %%NL80211_ATTR_TID_CONFIG_TID. Its type is u8,
+ * if the peer MAC address is passed in %NL80211_ATTR_MAC, the aggregation
+ * configuration is applied
+ * to the data frame for the tid to that connected station.
+ * Station specific aggregation configuration is valid only for STA's
+ * current connection. i.e. the configuration will be reset to default when
+ * the station connects back after disconnection/roaming.
+ * when user-space does not include %NL80211_ATTR_MAC, this configuration
+ * should be treated as per-netdev configuration. This configuration will
+ * be cleared when the interface goes down and on the disconnection from a
+ * BSS. Driver supporting this feature should advertise
+ * NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL and supporting per station
+ * aggregation configuration should advertise
+ * NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL.
*/
enum nl80211_attr_tid_config {
__NL80211_ATTR_TID_INVALID,
@@ -4623,6 +4638,7 @@ enum nl80211_attr_tid_config {
NL80211_ATTR_TID_CONFIG_RETRY,
NL80211_ATTR_TID_CONFIG_RETRY_SHORT,
NL80211_ATTR_TID_CONFIG_RETRY_LONG,
+ NL80211_ATTR_TID_CONFIG_AMPDU_CTRL,
/* keep last */
__NL80211_ATTR_TID_CONFIG_AFTER_LAST,
@@ -5437,6 +5453,10 @@ enum nl80211_feature_flags {
* count functionality.
* @NL80211_EXT_FEATURE_PER_STA_RETRY_CONFIG: Driver supports STA specific
* data retry count functionality.
+ * @NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL: Driver supports TID specific
+ * aggregation control(enable/disable).
+ * @NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL: Driver supports per STA
+ * specific TID aggregation control(enable/disable).
*
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -5483,6 +5503,8 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG,
NL80211_EXT_FEATURE_PER_TID_RETRY_CONFIG,
NL80211_EXT_FEATURE_PER_STA_RETRY_CONFIG,
+ NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL,
+ NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 998c9dc..d4a88fa 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -288,6 +288,8 @@ static int validate_ie_attr(const struct nlattr *attr,
[NL80211_ATTR_TID_CONFIG_RETRY] = { .type = NLA_FLAG },
[NL80211_ATTR_TID_CONFIG_RETRY_SHORT] = NLA_POLICY_MIN(NLA_U8, 1),
[NL80211_ATTR_TID_CONFIG_RETRY_LONG] = NLA_POLICY_MIN(NLA_U8, 1),
+ [NL80211_ATTR_TID_CONFIG_AMPDU_CTRL] =
+ NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
};
const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
@@ -13304,6 +13306,19 @@ static int parse_tid_conf(struct cfg80211_registered_device *rdev,
}
}
+ if (attrs[NL80211_ATTR_TID_CONFIG_AMPDU_CTRL]) {
+ if (!wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL))
+ return -ENOTSUPP;
+
+ if (peer && !wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL))
+ return -ENOTSUPP;
+
+ tid_conf->tid_conf_mask |= IEEE80211_TID_CONF_AMPDU;
+ tid_conf->ampdu =
+ nla_get_u8(attrs[NL80211_ATTR_TID_CONFIG_AMPDU_CTRL]);
+ }
return 0;
}
--
1.9.1
