The MBSS feature was already disabled for bcm43362 as it resulted in a
beacon with BRCM_TEST_SSID regardless user configuration in hostapd. Now
the same has been reported for bcm4330 so disable the feature for this
device as well.
Reported-by: Russell King <linux@xxxxxxxxxxxxxxx>
Tested-by: Christopher Martin <chrsmrtn@xxxxxxxxx>
Reviewed-by: Hante Meuleman <hante.meuleman@xxxxxxxxxxxx>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@xxxxxxxxxxxx>
Reviewed-by: Franky Lin <franky.lin@xxxxxxxxxxxx>
Signed-off-by: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
index b91b7ec..072c51c 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
@@ -272,9 +272,15 @@ void brcmf_feat_attach(struct brcmf_pub *drvr)
BIT(BRCMF_FEAT_WOWL_GTK);
}
}
- /* MBSS does not work for 43362 */
- if (drvr->bus_if->chip == BRCM_CC_43362_CHIP_ID)
+ /* MBSS does not work for all chips */
+ switch (drvr->bus_if->chip) {
+ case BRCM_CC_4330_CHIP_ID:
+ case BRCM_CC_43362_CHIP_ID:
ifp->drvr->feat_flags &= ~BIT(BRCMF_FEAT_MBSS);
+ break;
+ default:
+ break;
+ }
brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_RSDB, "rsdb_mode");
brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_TDLS, "tdls_enable");
brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_MFP, "mfp");
--
1.9.1
