Hi Kalle,
I have checked the patch, and it is fine.
Thanks,
Rakesh Pillai.
On 2019-02-08 19:46, Kalle Valo wrote:
Rakesh Pillai <pillair@xxxxxxxxxxxxxx> wrote:
The support to put WCN3990 firmware into Factory
test mode is not present currently. The WCN3990
firmware can operate in Factory test mode based
on the mode it receives in the wlan enable message
from the host driver.
When the host driver is started in testmode send
the operating mode as UTF mode, to the WCN3990
firmware, in the wlan enable message to start the
firmware in Factory test mode.
Tested on: WCN3990
Tested FW: WLAN.HL.2.0-01192-QCAHLSWMTPLZ-1.
Signed-off-by: Rakesh Pillai <pillair@xxxxxxxxxxxxxx>
Reviewed-by: Brian Norris <briannorris@xxxxxxxxxxxx>
Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
I was able to apply with 3-way merge but please double check the
results:
https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=pending&id=ef562f95826f412c14f59ca916ff55931bed0813
Applying: ath10k: Enable Factory Test Mode for WCN3990
Using index info to reconstruct a base tree...
M drivers/net/wireless/ath/ath10k/ahb.c
M drivers/net/wireless/ath/ath10k/core.c
M drivers/net/wireless/ath/ath10k/hif.h
M drivers/net/wireless/ath/ath10k/mac.c
M drivers/net/wireless/ath/ath10k/pci.c
M drivers/net/wireless/ath/ath10k/sdio.c
M drivers/net/wireless/ath/ath10k/snoc.c
M drivers/net/wireless/ath/ath10k/usb.c
Falling back to patching base and 3-way merge...
Auto-merging drivers/net/wireless/ath/ath10k/usb.c
Auto-merging drivers/net/wireless/ath/ath10k/snoc.c
Auto-merging drivers/net/wireless/ath/ath10k/sdio.c
Auto-merging drivers/net/wireless/ath/ath10k/pci.c
Auto-merging drivers/net/wireless/ath/ath10k/mac.c
Auto-merging drivers/net/wireless/ath/ath10k/hif.h
Auto-merging drivers/net/wireless/ath/ath10k/core.c
Auto-merging drivers/net/wireless/ath/ath10k/ahb.c
