On 2/8/2019 7:42 AM, Rafał Miłecki wrote:
From: Rafał Miłecki <rafal@xxxxxxxxxx>
So far there were two monitor frame formats:
1) 802.11 frames (with frame (sub)type & all addresses)
2) 802.11 frames with the radiotap header
Testing the latest FullMAC firmwares for 4366b1/4366c0 resulted in
discovering a new format being used. It seems (almost?) identical to the
one known from ucode used in SoftMAC devices which is most likely the
same codebase anyway.
While new firmwares will /announce/ radiotap header support using the
"rtap" fw capability string it seems no string was added for the new
ucode header format.
All above means that:
1) We need new format support when dealing with a received frame
2) A new feature bit & mapping quirks have to be added manually
As for now only an empty radiotap is being created. Adding support for
extracting some info (band, channel, signal, etc.) is planned for the
future.
Probably V1 was missing an ACK hence the confusion so to be sure...
Acked-by: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
---
V2: Update commit message (only):
1) Don't say the new firmwares were expected to provide radiotap
frames. That was my misinterpretation of adding "rtap" string.
2) List all monitor frame formats as it apparently got a bit
confusing at this point (there are 3 different ones!).
---
.../broadcom/brcm80211/brcmfmac/core.c | 55 +++++++++++++++++++
.../broadcom/brcm80211/brcmfmac/feature.c | 4 ++
.../broadcom/brcm80211/brcmfmac/feature.h | 4 +-
3 files changed, 62 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
index 860a4372cb56..e772c0845638 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
@@ -43,6 +43,36 @@
#define BRCMF_BSSIDX_INVALID -1
+#define RXS_PBPRES BIT(2)
+
+#define D11_PHY_HDR_LEN 6
+
+struct d11rxhdr_le {
+ __le16 RxFrameSize;
+ u16 PAD;
+ __le16 PhyRxStatus_0;
+ __le16 PhyRxStatus_1;
+ __le16 PhyRxStatus_2;
+ __le16 PhyRxStatus_3;
+ __le16 PhyRxStatus_4;
+ __le16 PhyRxStatus_5;
+ __le16 RxStatus1;
+ __le16 RxStatus2;
+ __le16 RxTSFTime;
+ __le16 RxChan;
+ u8 unknown[12];
+} __packed;
+
+struct wlc_d11rxhdr {
+ struct d11rxhdr_le rxhdr;
+ __le32 tsf_l;
+ s8 rssi;
+ s8 rxpwr0;
+ s8 rxpwr1;
+ s8 do_rssi_ma;
+ s8 rxpwr[4];
+} __packed;
+
char *brcmf_ifname(struct brcmf_if *ifp)
{
if (!ifp)
@@ -409,6 +439,31 @@ void brcmf_netif_mon_rx(struct brcmf_if *ifp, struct sk_buff *skb)
{
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MONITOR_FMT_RADIOTAP)) {
/* Do nothing */
+ } else if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MONITOR_FMT_HW_RX_HDR)) {
+ struct wlc_d11rxhdr *wlc_rxhdr = (struct wlc_d11rxhdr *)skb->data;
+ struct ieee80211_radiotap_header *radiotap;
+ unsigned int offset;
+ u16 RxStatus1;
+
+ RxStatus1 = le16_to_cpu(wlc_rxhdr->rxhdr.RxStatus1);
+
+ offset = sizeof(struct wlc_d11rxhdr);
+ /* MAC inserts 2 pad bytes for a4 headers or QoS or A-MSDU
+ * subframes
+ */
+ if (RxStatus1 & RXS_PBPRES)
+ offset += 2;
+ offset += D11_PHY_HDR_LEN;
+
+ skb_pull(skb, offset);
+
+ /* TODO: use RX header to fill some radiotap data */
+ radiotap = skb_push(skb, sizeof(*radiotap));
+ memset(radiotap, 0, sizeof(*radiotap));
+ radiotap->it_len = cpu_to_le16(sizeof(*radiotap));
+
+ /* TODO: 4 bytes with receive status? */
+ skb->len -= 4;
} else {
struct ieee80211_radiotap_header *radiotap;
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
index 4c5a3995dc35..b91b7ecbfedf 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
@@ -103,6 +103,10 @@ static const struct brcmf_feat_fwfeat brcmf_feat_fwfeat_map[] = {
{ "01-6cb8e269", BIT(BRCMF_FEAT_MONITOR) },
/* brcmfmac4366b-pcie.bin from linux-firmware.git commit 52442afee990 */
{ "01-c47a91a4", BIT(BRCMF_FEAT_MONITOR) },
+ /* brcmfmac4366b-pcie.bin from linux-firmware.git commit 211de1679a68 */
+ { "01-801fb449", BIT(BRCMF_FEAT_MONITOR_FMT_HW_RX_HDR) },
+ /* brcmfmac4366c-pcie.bin from linux-firmware.git commit 211de1679a68 */
+ { "01-d2cbb8fd", BIT(BRCMF_FEAT_MONITOR_FMT_HW_RX_HDR) },
};
static void brcmf_feat_firmware_overrides(struct brcmf_pub *drv)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h
index 0b4974df353a..5e88a7f16ad2 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h
@@ -35,6 +35,7 @@
* FWSUP: Firmware supplicant.
* MONITOR: firmware can pass monitor packets to host.
* MONITOR_FMT_RADIOTAP: firmware provides monitor packets with radiotap header
+ * MONITOR_FMT_HW_RX_HDR: firmware provides monitor packets with hw/ucode header
*/
#define BRCMF_FEAT_LIST \
BRCMF_FEAT_DEF(MBSS) \
@@ -52,7 +53,8 @@
BRCMF_FEAT_DEF(GSCAN) \
BRCMF_FEAT_DEF(FWSUP) \
BRCMF_FEAT_DEF(MONITOR) \
- BRCMF_FEAT_DEF(MONITOR_FMT_RADIOTAP)
+ BRCMF_FEAT_DEF(MONITOR_FMT_RADIOTAP) \
+ BRCMF_FEAT_DEF(MONITOR_FMT_HW_RX_HDR)
/*
* Quirks:
