Hi there,
Debian 10 testing, Intel 8265, firmware 36.9f0a2d68.0
2 interfaces on 1 phy: 1 managed, 1 AP
background scan configured: bgscan="simple:1:-70:900"
------------
phy#0
Interface hotspot
ifindex 11
wdev 0x4
addr a0:a4:c5:96:b5:ec
ssid yyyyyy
type AP
channel 1 (2412 MHz), width: 20 MHz (no HT), center1: 2412 MHz
txpower 22.00 dBm
Unnamed/non-netdev interface
wdev 0x2
addr a0:a4:c5:96:b5:eb
type P2P-device
txpower 0.00 dBm
Interface wlp1s0
ifindex 7
wdev 0x1
addr a0:a4:c5:96:b5:ea
ssid xxxxxx
type managed
channel 36 (5180 MHz), width: 80 MHz, center1: 5210 MHz
----------
[ 715.890990] iwlwifi 0000:01:00.0: regular scan timed out
[ 715.891047] iwlwifi 0000:01:00.0: Microcode SW error detected.
Restarting 0x2000000.
[ 715.891172] iwlwifi 0000:01:00.0: Start IWL Error Log Dump:
[ 715.891175] iwlwifi 0000:01:00.0: Status: 0x00000100, count: 6
[ 715.891177] iwlwifi 0000:01:00.0: Loaded firmware version: 36.9f0a2d68.0
[ 715.891180] iwlwifi 0000:01:00.0: 0x00000084 | NMI_INTERRUPT_UNKNOWN
[ 715.891182] iwlwifi 0000:01:00.0: 0x000002A0 | trm_hw_status0
[ 715.891184] iwlwifi 0000:01:00.0: 0x00000000 | trm_hw_status1
[ 715.891186] iwlwifi 0000:01:00.0: 0x0002485C | branchlink2
[ 715.891188] iwlwifi 0000:01:00.0: 0x0003A7CA | interruptlink1
[ 715.891190] iwlwifi 0000:01:00.0: 0x00000868 | interruptlink2
[ 715.891192] iwlwifi 0000:01:00.0: 0x00000000 | data1
[ 715.891195] iwlwifi 0000:01:00.0: 0x00000080 | data2
[ 715.891197] iwlwifi 0000:01:00.0: 0x07830000 | data3
[ 715.891199] iwlwifi 0000:01:00.0: 0x34C0F92B | beacon time
[ 715.891201] iwlwifi 0000:01:00.0: 0xB72786AB | tsf low
[ 715.891203] iwlwifi 0000:01:00.0: 0x000002C5 | tsf hi
[ 715.891205] iwlwifi 0000:01:00.0: 0x00000000 | time gp1
[ 715.891207] iwlwifi 0000:01:00.0: 0x01E94EF8 | time gp2
[ 715.891209] iwlwifi 0000:01:00.0: 0x00000001 | uCode revision type
[ 715.891211] iwlwifi 0000:01:00.0: 0x00000024 | uCode version major
[ 715.891213] iwlwifi 0000:01:00.0: 0x9F0A2D68 | uCode version minor
[ 715.891215] iwlwifi 0000:01:00.0: 0x00000230 | hw version
[ 715.891217] iwlwifi 0000:01:00.0: 0x00489000 | board version
[ 715.891219] iwlwifi 0000:01:00.0: 0x0AA1001C | hcmd
[ 715.891221] iwlwifi 0000:01:00.0: 0x00022000 | isr0
[ 715.891223] iwlwifi 0000:01:00.0: 0x00800000 | isr1
[ 715.891225] iwlwifi 0000:01:00.0: 0x08001802 | isr2
[ 715.891227] iwlwifi 0000:01:00.0: 0x00417CC0 | isr3
[ 715.891229] iwlwifi 0000:01:00.0: 0x00000000 | isr4
[ 715.891231] iwlwifi 0000:01:00.0: 0x0AA1001C | last cmd Id
[ 715.891233] iwlwifi 0000:01:00.0: 0x00000000 | wait_event
[ 715.891235] iwlwifi 0000:01:00.0: 0x00000080 | l2p_control
[ 715.891237] iwlwifi 0000:01:00.0: 0x00018020 | l2p_duration
[ 715.891239] iwlwifi 0000:01:00.0: 0x0000003F | l2p_mhvalid
[ 715.891241] iwlwifi 0000:01:00.0: 0x00000080 | l2p_addr_match
[ 715.891243] iwlwifi 0000:01:00.0: 0x0000000D | lmpm_pmg_sel
[ 715.891245] iwlwifi 0000:01:00.0: 0x04120134 | timestamp
[ 715.891247] iwlwifi 0000:01:00.0: 0x003490A0 | flow_handler
[ 715.891298] iwlwifi 0000:01:00.0: 0x00000000 | ADVANCED_SYSASSERT
[ 715.891300] iwlwifi 0000:01:00.0: 0x00000000 | umac branchlink1
[ 715.891302] iwlwifi 0000:01:00.0: 0x00000000 | umac branchlink2
[ 715.891304] iwlwifi 0000:01:00.0: 0x00000000 | umac interruptlink1
[ 715.891306] iwlwifi 0000:01:00.0: 0x00000000 | umac interruptlink2
[ 715.891308] iwlwifi 0000:01:00.0: 0x00000000 | umac data1
[ 715.891310] iwlwifi 0000:01:00.0: 0x00000000 | umac data2
[ 715.891312] iwlwifi 0000:01:00.0: 0x00000000 | umac data3
[ 715.891314] iwlwifi 0000:01:00.0: 0x00000000 | umac major
[ 715.891316] iwlwifi 0000:01:00.0: 0x00000000 | umac minor
[ 715.891318] iwlwifi 0000:01:00.0: 0x00000000 | frame pointer
[ 715.891320] iwlwifi 0000:01:00.0: 0x00000000 | stack pointer
[ 715.891322] iwlwifi 0000:01:00.0: 0x00000000 | last host cmd
[ 715.891324] iwlwifi 0000:01:00.0: 0x00000000 | isr status reg
[ 715.891330] ieee80211 phy1: Hardware restart was requested
Let me know if I should provide any further information.
Thanks,
Lukas
