Brian Norris <briannorris@xxxxxxxxxxxx> writes: > On Wed, Aug 29, 2018 at 12:30:38PM +0530, Rakesh Pillai wrote: >> The support to put WCN3990 firmware into Factory >> test mode is not present currently. The WCN3990 >> firmware can operate in Factory test mode based >> on the mode it receives in the wlan enable message >> from the host driver. >> >> When the host driver is started in testmode send >> the operating mode as UTF mode, to the WCN3990 >> firmware, in the wlan enable message to start the >> firmware in Factory test mode. >> >> Tested on: WCN3990 >> Tested FW: WLAN.HL.2.0-01192-QCAHLSWMTPLZ-1. >> >> Signed-off-by: Rakesh Pillai <pillair@xxxxxxxxxxxxxx> >> --- >> drivers/net/wireless/ath/ath10k/ahb.c | 3 ++- >> drivers/net/wireless/ath/ath10k/core.c | 2 +- >> drivers/net/wireless/ath/ath10k/hif.h | 7 ++++--- >> drivers/net/wireless/ath/ath10k/mac.c | 2 +- >> drivers/net/wireless/ath/ath10k/pci.c | 3 ++- >> drivers/net/wireless/ath/ath10k/sdio.c | 3 ++- >> drivers/net/wireless/ath/ath10k/snoc.c | 20 ++++++++++++++++---- >> drivers/net/wireless/ath/ath10k/testmode.c | 2 +- >> drivers/net/wireless/ath/ath10k/usb.c | 3 ++- >> 9 files changed, 31 insertions(+), 14 deletions(-) > > What ever happened here? I'm told this is useful, but I see no comments > and it's marked Deferred in patchwork: > > https://patchwork.kernel.org/patch/10579559/ Not sure, I guess it just got accidentally hidden with other patches. It's in new state now. > FWIW, it looks OK to me: > > Reviewed-by: Brian Norris <briannorris@xxxxxxxxxxxx> Thanks! -- Kalle Valo
