From: Ahmad Masri <amasri@xxxxxxxxxxxxxx>
Add support for Access Category to select queue for transmit packets.
The callback wil_select_queue will return the queue id [0..3] to use for
the current skb transmission.
This feature is disabled by default. Use ac_queues module param to enable.
Signed-off-by: Ahmad Masri <amasri@xxxxxxxxxxxxxx>
Signed-off-by: Maya Erez <merez@xxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/wil6210/netdev.c | 43 +++++++++++++++++++++++--
drivers/net/wireless/ath/wil6210/wil_platform.h | 2 ++
2 files changed, 43 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/netdev.c b/drivers/net/wireless/ath/wil6210/netdev.c
index ca10626..dfc9617 100644
--- a/drivers/net/wireless/ath/wil6210/netdev.c
+++ b/drivers/net/wireless/ath/wil6210/netdev.c
@@ -20,6 +20,8 @@
#include "wil6210.h"
#include "txrx.h"
+#define WIL6210_TX_QUEUES (4)
+
bool wil_has_other_active_ifaces(struct wil6210_priv *wil,
struct net_device *ndev, bool up, bool ok)
{
@@ -91,10 +93,43 @@ static int wil_stop(struct net_device *ndev)
return rc;
}
+/**
+ * AC to queue mapping
+ *
+ * AC_VO -> queue 3
+ * AC_VI -> queue 2
+ * AC_BE -> queue 1
+ * AC_BK -> queue 0
+ */
+static u16 wil_select_queue(struct net_device *ndev,
+ struct sk_buff *skb,
+ struct net_device *sb_dev,
+ select_queue_fallback_t fallback)
+{
+ static const u16 wil_1d_to_queue[8] = {1, 0, 0, 1, 2, 2, 3, 3};
+ struct wil6210_priv *wil = ndev_to_wil(ndev);
+ u16 qid;
+
+ if (!wil->config.ac_queues)
+ return 0;
+
+ /* determine the priority */
+ if (skb->priority == 0 || skb->priority > 7)
+ skb->priority = cfg80211_classify8021d(skb, NULL);
+
+ qid = wil_1d_to_queue[skb->priority];
+
+ wil_dbg_txrx(wil, "select queue for priority %d -> queue %d\n",
+ skb->priority, qid);
+
+ return qid;
+}
+
static const struct net_device_ops wil_netdev_ops = {
.ndo_open = wil_open,
.ndo_stop = wil_stop,
.ndo_start_xmit = wil_start_xmit,
+ .ndo_select_queue = wil_select_queue,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
};
@@ -317,8 +352,12 @@ struct wil6210_vif *
return ERR_PTR(-EINVAL);
}
- ndev = alloc_netdev(sizeof(*vif), name, name_assign_type,
- wil_dev_setup);
+ if (wil->config.ac_queues)
+ ndev = alloc_netdev_mqs(sizeof(*vif), name, name_assign_type,
+ wil_dev_setup, WIL6210_TX_QUEUES, 1);
+ else
+ ndev = alloc_netdev(sizeof(*vif), name, name_assign_type,
+ wil_dev_setup);
if (!ndev) {
dev_err(wil_to_dev(wil), "alloc_netdev failed\n");
return ERR_PTR(-ENOMEM);
diff --git a/drivers/net/wireless/ath/wil6210/wil_platform.h b/drivers/net/wireless/ath/wil6210/wil_platform.h
index 6132888..cab6af3 100644
--- a/drivers/net/wireless/ath/wil6210/wil_platform.h
+++ b/drivers/net/wireless/ath/wil6210/wil_platform.h
@@ -60,6 +60,8 @@ struct wil_platform_config {
u8 disable_ap_sme;
/* Max number of stations associated to the AP */
unsigned int max_assoc_sta;
+ /* enable access category for transmit packets, default - no */
+ u8 ac_queues;
};
/**
--
1.9.1
