WCN3990 sends the tx completion for management frames via wmi. The tx completion for the multiple management frames can also be bundled in a single wmi event and sent to the host driver. This reduces the number of WMI events sent to the host driver by the target. Enable the support in firmware to send tx completion for management frames, bundled in a single event, by setting the proper flag in wmi init command. Handle the bundled management tx completion event in host driver. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1 Changes from v1: - Addressed comments to remove tricky typecasting. - Fixed compilation warnings. Rakesh Pillai (2): ath10k: Handle bundled tx completion for management frames ath10k: Enable bundle tx compl for management frames in WCN3990 drivers/net/wireless/ath/ath10k/wmi-ops.h | 13 +++++++ drivers/net/wireless/ath/ath10k/wmi-tlv.c | 65 ++++++++++++++++++++++++++++++- drivers/net/wireless/ath/ath10k/wmi-tlv.h | 3 ++ drivers/net/wireless/ath/ath10k/wmi.c | 23 +++++++++++ drivers/net/wireless/ath/ath10k/wmi.h | 7 ++++ 5 files changed, 110 insertions(+), 1 deletion(-) -- 2.7.4
