Search Linux Wireless

[PATCH v2 1/4] rtlwifi: rtl8723ae: Take the FW LPS mode handling out

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This appears to trigger a firmware bug and causes severe
problems with rtl8723ae PCI devices.

When the power save mode is activated for longer periods
of time the firmware stops to receive any packets.

This problem was exposed by commit 873ffe154ae0 ("rtlwifi:
Fix logic error in enter/exit power-save mode").

Previously the power save mode was only active rarely and
only for a short time so that the problem was not noticeable.

Signed-off-by: Bernd Edlinger <bernd.edlinger@xxxxxxxxxx>
---
 drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c
index 07b82700d1..3103151 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c
@@ -266,8 +266,8 @@ static bool is_fw_header(struct rtlwifi_firmware_header *hdr)
 static struct rtl_mod_params rtl8723e_mod_params = {
 	.sw_crypto = false,
 	.inactiveps = true,
-	.swctrl_lps = false,
-	.fwctrl_lps = true,
+	.swctrl_lps = true,
+	.fwctrl_lps = false,
 	.aspm_support = 1,
 	.debug_level = 0,
 	.debug_mask = 0,
@@ -395,8 +395,8 @@ static bool is_fw_header(struct rtlwifi_firmware_header *hdr)
 		   bool, 0444);
 MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n");
 MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
-MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n");
-MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n");
+MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 1)\n");
+MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 0)\n");
 MODULE_PARM_DESC(msi, "Set to 1 to use MSI interrupts mode (default 0)\n");
 MODULE_PARM_DESC(aspm, "Set to 1 to enable ASPM (default 1)\n");
 MODULE_PARM_DESC(debug_level, "Set debug level (0-5) (default 0)");
-- 
1.9.1




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux