On 1/5/19 10:30 AM, Bernd Edlinger wrote:
On 1/5/19 5:13 PM, Larry Finger wrote:
but this works:
modprobe rtl8723ae debug_mask=0xFFFFFFFF debug_level=5 swlps=1 fwlps=0
Yes, I think that is a better thing to do now. If and when Realtek finds a firmware bug, and when the new firmware is readily available, then there will not be a lot of code to reinstall.
Okay, my assumption of how the firmware bug "works" is this:
Once the firmware enters power save mode, it will deliver exactly one (or maybe two)
Rx interrupts. If one of those triggers the driver to leave the power save mode again,
the firmware continues to work.
If those are only beacons, they won't leave the power save mode. Then the firmware
will usually not recover.
Since prior to commit 873ffe154ae0 ("rtlwifi: Fix logic error in enter/exit power-save mode")
the power save mode was only activated when there _is_ busy traffic, the next
packet did usually wake the firmware, rarely it did freeze however.
Other things like changing the cck_packet_detection_threshold or refresh_rate_adaptive_mask
can also kick the firmware back to life.
Hope this helps to track down the root cause of this bug.
As I know nothing of the firmware, that is outside my expertise, but that
observation should be of great help to PK Shih, and his colleagues at Realtek.
Larry
