Search Linux Wireless

[PATCH 2/2] rt2x00: define RF5592 in init_eeprom routine

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch fixes following crash on Linksys EA2750 during 5GHz wifi
init:

[    7.955153] rt2800pci 0000:01:00.0: card - bus=0x1, slot = 0x0 irq=4
[    7.962259] rt2800pci 0000:01:00.0: loaded eeprom from mtd device "Factory"
[    7.969435] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
[    7.977348] ieee80211 phy0: rt2800_init_eeprom: Error - Invalid RF chipset 0x0000 detected
[    7.985793] ieee80211 phy0: rt2x00lib_probe_dev: Error - Failed to allocate device
[    7.993569] CPU 0 Unable to handle kernel paging request at virtual address 00000024, epc == 800c8f54, ra == 80249ff8
[    8.004408] Oops[#1]:

Signed-off-by: Tomislav Požega <pozega.tomislav@xxxxxxxxx>
---
 drivers/net/wireless/ralink/rt2x00/rt2800lib.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
index 7f813f6..86770e8 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -8839,6 +8839,8 @@ static int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
 		rf = RF3322;
 	else if (rt2x00_rt(rt2x00dev, RT5350))
 		rf = RF5350;
+	else if (rt2x00_rt(rt2x00dev, RT5592))
+		rf = RF5592;
 	else
 		rf = rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RF_TYPE);
 
-- 
1.7.0.4




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux