On Tue, Dec 11, 2018 at 10:06 AM Ricardo Salveti <rsalveti@xxxxxxxxxxxx> wrote: > > Hey Tony and John, > > I just got to test an OpenEmbedded-based rootfs with kernel > 4.19/4.20-rc6 on a HiKey board and wlcore is constantly getting stuck > right after boot (via NetworkManager). > > As this works just fine with 4.18, I did a quick bisect and found that > the patch that enables runtime PM autosuspend support (9b71578de0) is > the one that made the hang to happen. > > The hang trace with 4.20-rc6: > [ 484.321030] INFO: task NetworkManager:599 blocked for more than 120 seconds. > [ 484.328324] Not tainted 4.20.0-rc6 #1 > [ 484.334057] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" > disables this message. > [ 484.342182] NetworkManager D 0 599 1 0x00000008 > [ 484.347724] Call trace: > [ 484.350200] __switch_to+0xa0/0xf8 > [ 484.353647] __schedule+0x2ac/0x948 > [ 484.357158] schedule+0x38/0x98 > [ 484.360318] schedule_timeout+0x288/0x458 > [ 484.364368] wait_for_common+0x148/0x170 > [ 484.368310] wait_for_completion+0x28/0x38 > [ 484.372430] mmc_wait_for_req_done+0x38/0x198 > [ 484.376806] mmc_wait_for_req+0xb0/0xf0 > [ 484.380664] mmc_io_rw_extended+0x1d0/0x2c0 > [ 484.384866] sdio_io_rw_ext_helper+0x180/0x1f8 > [ 484.389356] sdio_memcpy_toio+0x44/0x58 > [ 484.393216] wl12xx_sdio_raw_write+0xe0/0x1b0 > [ 484.397596] wlcore_boot_upload_firmware+0x1a8/0x4c0 > [ 484.402582] wl18xx_boot+0x7dc/0xbc0 > [ 484.406181] wl1271_op_add_interface+0x558/0x910 > [ 484.410842] drv_add_interface+0x5c/0x1e8 > [ 484.414876] ieee80211_do_open+0x220/0x7f8 > [ 484.418992] ieee80211_open+0x4c/0x68 > [ 484.422697] __dev_open+0xdc/0x158 > [ 484.426119] __dev_change_flags+0x15c/0x1c0 > [ 484.430326] dev_change_flags+0x34/0x70 > [ 484.434198] do_setlink+0x28c/0xba8 > [ 484.437709] rtnl_newlink+0x408/0x768 > [ 484.441392] rtnetlink_rcv_msg+0x12c/0x338 > [ 484.445510] netlink_rcv_skb+0x60/0x120 > [ 484.449365] rtnetlink_rcv+0x28/0x38 > [ 484.452961] netlink_unicast+0x194/0x210 > [ 484.456902] netlink_sendmsg+0x1a0/0x348 > [ 484.460847] sock_sendmsg+0x34/0x50 > [ 484.464354] ___sys_sendmsg+0x288/0x2c8 > [ 484.468234] __sys_sendmsg+0x7c/0xd0 > [ 484.471814] __arm64_sys_sendmsg+0x2c/0x38 > [ 484.475932] el0_svc_common+0x94/0xe8 > [ 484.479635] el0_svc_handler+0x74/0x90 > [ 484.483405] el0_svc+0x8/0xc > > Since it seems the same driver and board combination is working fine > for John (with Android), I decided to take a look at what could be > causing this from the NetworkManager side and found that the MAC > address randomization during scan is what triggers the hang. If I > disable MAC address randomization in NetworkManager > (wifi.scan-rand-mac-address=no) it works fine, so I wonder if there is > a possible suspend/resume logic issue with the if up -> change mac -> > scan flow. > > John, did you have any similar issue on your test environment with > kernel >= 4.19? > > I'm still trying to isolate this issue without NetworkManager to see > what exactly is causing the hang, but wanted to report this first in > case you guys have any idea about what could be causing the hang. So this sounds very much like an issue Anders (cc'ed) was seeing in the lab but not elsewhere. I think he had narrowed down to a similar commit (my memory is foggy), but I think he hadn't isolated the behavior to send details to the list. I've not come across it myself, as the Android environment doesn't seem to tickle this. thanks -john
