Search Linux Wireless

[PATCH v4 1/3] dt-bindings: net: ath10k: fix node name and device type in qcom ath10k example

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In qcom,ath10k documentation, ath10k is used as node name in the example of
pci based device. Normally, node name should be class of device and not the
model name, so fix it to node name "wifi". And remove the property device_type
pci since only pci bridges should have this property.

Signed-off-by: Bhagavathi Perumal S <bperumal@xxxxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
index 2196d1a..ef60f25 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
@@ -74,9 +74,8 @@ pci {
 		#address-cells = <3>;
 		device_type = "pci";
 
-		ath10k@0,0 {
+		wifi@0,0 {
 			reg = <0 0 0 0 0>;
-			device_type = "pci";
 			qcom,ath10k-calibration-data = [ 01 02 03 ... ];
 		};
 	};
-- 
1.9.1




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux