This function converts some firmware-specific parameters into cfg80211 'rate_info' structures. It currently assumes it's dealing only with TX bitrate, but the RX bitrate looks to be the same, so refactor this function to be reusable. Signed-off-by: Brian Norris <briannorris@xxxxxxxxxxxx> --- v2: * no change - just split unrelated (debugfs) patch to its own series --- .../net/wireless/marvell/mwifiex/cfg80211.c | 36 ++++++++++--------- 1 file changed, 19 insertions(+), 17 deletions(-) diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c index adc88433faa8..02b80ea232a7 100644 --- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c +++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c @@ -1275,27 +1275,27 @@ mwifiex_cfg80211_change_virtual_intf(struct wiphy *wiphy, } static void -mwifiex_parse_htinfo(struct mwifiex_private *priv, u8 tx_htinfo, +mwifiex_parse_htinfo(struct mwifiex_private *priv, u8 rateinfo, u8 htinfo, struct rate_info *rate) { struct mwifiex_adapter *adapter = priv->adapter; if (adapter->is_hw_11ac_capable) { /* bit[1-0]: 00=LG 01=HT 10=VHT */ - if (tx_htinfo & BIT(0)) { + if (htinfo & BIT(0)) { /* HT */ - rate->mcs = priv->tx_rate; + rate->mcs = rateinfo; rate->flags |= RATE_INFO_FLAGS_MCS; } - if (tx_htinfo & BIT(1)) { + if (htinfo & BIT(1)) { /* VHT */ - rate->mcs = priv->tx_rate & 0x0F; + rate->mcs = rateinfo & 0x0F; rate->flags |= RATE_INFO_FLAGS_VHT_MCS; } - if (tx_htinfo & (BIT(1) | BIT(0))) { + if (htinfo & (BIT(1) | BIT(0))) { /* HT or VHT */ - switch (tx_htinfo & (BIT(3) | BIT(2))) { + switch (htinfo & (BIT(3) | BIT(2))) { case 0: rate->bw = RATE_INFO_BW_20; break; @@ -1310,26 +1310,26 @@ mwifiex_parse_htinfo(struct mwifiex_private *priv, u8 tx_htinfo, break; } - if (tx_htinfo & BIT(4)) + if (htinfo & BIT(4)) rate->flags |= RATE_INFO_FLAGS_SHORT_GI; - if ((priv->tx_rate >> 4) == 1) + if ((rateinfo >> 4) == 1) rate->nss = 2; else rate->nss = 1; } } else { /* - * Bit 0 in tx_htinfo indicates that current Tx rate - * is 11n rate. Valid MCS index values for us are 0 to 15. + * Bit 0 in htinfo indicates that current rate is 11n. Valid + * MCS index values for us are 0 to 15. */ - if ((tx_htinfo & BIT(0)) && (priv->tx_rate < 16)) { - rate->mcs = priv->tx_rate; + if ((htinfo & BIT(0)) && (rateinfo < 16)) { + rate->mcs = rateinfo; rate->flags |= RATE_INFO_FLAGS_MCS; rate->bw = RATE_INFO_BW_20; - if (tx_htinfo & BIT(1)) + if (htinfo & BIT(1)) rate->bw = RATE_INFO_BW_40; - if (tx_htinfo & BIT(2)) + if (htinfo & BIT(2)) rate->flags |= RATE_INFO_FLAGS_SHORT_GI; } } @@ -1375,7 +1375,8 @@ mwifiex_dump_station_info(struct mwifiex_private *priv, sinfo->tx_packets = node->stats.tx_packets; sinfo->tx_failed = node->stats.tx_failed; - mwifiex_parse_htinfo(priv, node->stats.last_tx_htinfo, + mwifiex_parse_htinfo(priv, priv->tx_rate, + node->stats.last_tx_htinfo, &sinfo->txrate); sinfo->txrate.legacy = node->stats.last_tx_rate * 5; @@ -1401,7 +1402,8 @@ mwifiex_dump_station_info(struct mwifiex_private *priv, HostCmd_ACT_GEN_GET, DTIM_PERIOD_I, &priv->dtim_period, true); - mwifiex_parse_htinfo(priv, priv->tx_htinfo, &sinfo->txrate); + mwifiex_parse_htinfo(priv, priv->tx_rate, priv->tx_htinfo, + &sinfo->txrate); sinfo->signal_avg = priv->bcn_rssi_avg; sinfo->rx_bytes = priv->stats.rx_bytes; -- 2.20.0.rc2.403.gdbc3b29805-goog