Hi Rafał, > Rafał Miłecki <rafal@xxxxxxxxxx> hat am 24. November 2018 um 22:23 geschrieben: > > > Possibly you can just update hostapd to anything more recent? I'm afraid > the version you're using may suffer from a lot of security issues anyway thanks for your quick reply. I updated hostapd to 2.6.18 from Debian Buster. This makes hostapd work better, but AP mode still does work (kernel output): [ 6.085594] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.085772] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 6.085781] cfg80211: failed to load regulatory.db [ 6.148788] Console: switching to colour frame buffer device 240x67 [ 6.170518] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 6.197752] vc4-drm soc:gpu: fb0: DRM emulated frame buffer device [ 6.324425] random: crng init done [ 6.324438] random: 7 urandom warning(s) missed due to ratelimiting [ 6.365083] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 6.398502] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04 [ 6.800404] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0252 [ 9.961790] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 10.026130] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SS [ 10.272507] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 13.627905] brcmfmac: brcmf_cfg80211_stop_ap: setting AP mode failed -52 [ 146.411501] brcmfmac: brcmf_escan_timeout: timer expired [ 146.862393] brcmfmac: brcmf_vif_set_mgmt_ie: vndr ie set error : -52 [ 257.130466] brcmfmac: brcmf_escan_timeout: timer expired [ 257.581463] brcmfmac: brcmf_vif_set_mgmt_ie: vndr ie set error : -52 Hostapd output: random: Trying to read entropy from /dev/random Configuration file: /etc/hostapd/hostapd.conf nl80211: Using driver-based roaming nl80211: TDLS supported nl80211: Supported cipher 00-0f-ac:1 nl80211: Supported cipher 00-0f-ac:5 nl80211: Supported cipher 00-0f-ac:2 nl80211: Supported cipher 00-0f-ac:4 nl80211: Supported cipher 00-0f-ac:6 nl80211: Using driver-based off-channel TX nl80211: Supported vendor command: vendor_id=0x1018 subcmd=1 nl80211: Use separate P2P group interface (driver advertised support) nl80211: Enable multi-channel concurrent (driver advertised support) nl80211: use P2P_DEVICE support nl80211: interface wlan0 in phy phy0 nl80211: Set mode ifindex 3 iftype 3 (AP) nl80211: Setup AP(wlan0) - device_ap_sme=1 use_monitor=0 nl80211: Subscribe to mgmt frames with AP handle 0x543340 (device SME) nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x543340 match=04 nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument) nl80211: Register frame match - hexdump(len=1): 04 nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x543340 match=0501 nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument) nl80211: Register frame match - hexdump(len=2): 05 01 nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x543340 match=0504 nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument) nl80211: Register frame match - hexdump(len=2): 05 04 nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x543340 match=06 nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument) nl80211: Register frame match - hexdump(len=1): 06 nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x543340 match=08 nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument) nl80211: Register frame match - hexdump(len=1): 08 nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x543340 match=09 nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument) nl80211: Register frame match - hexdump(len=1): 09 nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x543340 match=0a nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument) nl80211: Register frame match - hexdump(len=1): 0a nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x543340 match=11 nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument) nl80211: Register frame match - hexdump(len=1): 11 nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x543340 match=7f nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument) nl80211: Register frame match - hexdump(len=1): 7f nl80211: Failed to subscribe for mgmt frames from SME driver - trying to run without it nl80211: Enable Probe Request reporting nl_preq=0x543340 nl80211: Register frame type=0x40 (WLAN_FC_STYPE_PROBE_REQ) nl_handle=0x543340 match= nl80211: Register frame command failed (type=64): ret=-22 (Invalid argument) nl80211: Register frame match - hexdump(len=0): [NULL] nl80211: Failed to enable Probe Request frame reporting in AP mode rfkill: initial event: idx=1 type=1 op=0 soft=0 hard=0 nl80211: Add own interface ifindex 3 (ifidx_reason -1) nl80211: if_indices[16]: 3(-1) phy: phy0 BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits) nl80211: Regulatory information - country=00 nl80211: 2402-2472 @ 40 MHz 20 mBm nl80211: 2457-2482 @ 20 MHz 20 mBm (no IR) nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR) nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR) nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) (no IR) nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR) nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR) nl80211: 57240-63720 @ 2160 MHz 0 mBm nl80211: Added 802.11b mode based on 802.11g information Allowed channel: mode=1 chan=1 freq=2412 MHz max_tx_power=20 dBm Allowed channel: mode=1 chan=2 freq=2417 MHz max_tx_power=20 dBm Allowed channel: mode=1 chan=3 freq=2422 MHz max_tx_power=20 dBm Allowed channel: mode=1 chan=4 freq=2427 MHz max_tx_power=20 dBm Allowed channel: mode=1 chan=5 freq=2432 MHz max_tx_power=20 dBm Allowed channel: mode=1 chan=6 freq=2437 MHz max_tx_power=20 dBm Allowed channel: mode=1 chan=7 freq=2442 MHz max_tx_power=20 dBm Allowed channel: mode=1 chan=8 freq=2447 MHz max_tx_power=20 dBm Allowed channel: mode=1 chan=9 freq=2452 MHz max_tx_power=20 dBm Allowed channel: mode=1 chan=10 freq=2457 MHz max_tx_power=20 dBm Allowed channel: mode=1 chan=11 freq=2462 MHz max_tx_power=20 dBm Allowed channel: mode=1 chan=12 freq=2467 MHz max_tx_power=20 dBm Allowed channel: mode=1 chan=13 freq=2472 MHz max_tx_power=20 dBm Allowed channel: mode=1 chan=14 freq=2484 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=34 freq=5170 MHz max_tx_power=8 dBm Allowed channel: mode=2 chan=36 freq=5180 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=38 freq=5190 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=40 freq=5200 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=42 freq=5210 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=44 freq=5220 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=46 freq=5230 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=48 freq=5240 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=52 freq=5260 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=56 freq=5280 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=60 freq=5300 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=64 freq=5320 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=100 freq=5500 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=104 freq=5520 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=108 freq=5540 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=112 freq=5560 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=116 freq=5580 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=120 freq=5600 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=124 freq=5620 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=128 freq=5640 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=132 freq=5660 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=136 freq=5680 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=140 freq=5700 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=144 freq=5720 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=149 freq=5745 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=153 freq=5765 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=157 freq=5785 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=161 freq=5805 MHz max_tx_power=20 dBm Allowed channel: mode=2 chan=165 freq=5825 MHz max_tx_power=20 dBm Allowed channel: mode=0 chan=1 freq=2412 MHz max_tx_power=20 dBm Allowed channel: mode=0 chan=2 freq=2417 MHz max_tx_power=20 dBm Allowed channel: mode=0 chan=3 freq=2422 MHz max_tx_power=20 dBm Allowed channel: mode=0 chan=4 freq=2427 MHz max_tx_power=20 dBm Allowed channel: mode=0 chan=5 freq=2432 MHz max_tx_power=20 dBm Allowed channel: mode=0 chan=6 freq=2437 MHz max_tx_power=20 dBm Allowed channel: mode=0 chan=7 freq=2442 MHz max_tx_power=20 dBm Allowed channel: mode=0 chan=8 freq=2447 MHz max_tx_power=20 dBm Allowed channel: mode=0 chan=9 freq=2452 MHz max_tx_power=20 dBm Allowed channel: mode=0 chan=10 freq=2457 MHz max_tx_power=20 dBm Allowed channel: mode=0 chan=11 freq=2462 MHz max_tx_power=20 dBm Allowed channel: mode=0 chan=12 freq=2467 MHz max_tx_power=20 dBm Allowed channel: mode=0 chan=13 freq=2472 MHz max_tx_power=20 dBm Allowed channel: mode=0 chan=14 freq=2484 MHz max_tx_power=20 dBm Completing interface initialization Mode: IEEE 802.11a Channel: 36 Frequency: 5180 MHz DFS 0 channels required radar detection nl80211: Set freq 5180 (ht_enabled=0, vht_enabled=0, bandwidth=20 MHz, cf1=5180 MHz, cf2=0 MHz) * freq=5180 * vht_enabled=0 * ht_enabled=0 * channel_type=0 RATE[0] rate=60 flags=0x1 RATE[1] rate=90 flags=0x0 RATE[2] rate=120 flags=0x1 RATE[3] rate=180 flags=0x0 RATE[4] rate=240 flags=0x1 RATE[5] rate=360 flags=0x0 RATE[6] rate=480 flags=0x0 RATE[7] rate=540 flags=0x0 hostapd_setup_bss(hapd=0x5448a8 (wlan0), first=1) wlan0: Flushing old station entries nl80211: flush -> DEL_STATION wlan0 (all) nl80211: Station flush failed: ret=-14 (Bad address) wlan0: Could not connect to kernel driver wlan0: Deauthenticate all stations Stefan
