Remove comment about one configurable BSSID registers since we utilize AP-Client feature now. Signed-off-by: Stanislaw Gruszka <sgruszka@xxxxxxxxxx> --- drivers/net/wireless/mediatek/mt76/mt76x02_util.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_util.c b/drivers/net/wireless/mediatek/mt76/mt76x02_util.c index 2bb79c6eb54b..9fd9b5f9d3f5 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76x02_util.c +++ b/drivers/net/wireless/mediatek/mt76/mt76x02_util.c @@ -250,17 +250,10 @@ int mt76x02_sta_remove(struct ieee80211_hw *hw, struct ieee80211_vif *vif, idx = 1 + (((dev->mt76.macaddr[0] ^ vif->addr[0]) >> 2) & 7); /* - * Client mode typically only has one configurable BSSID register, - * which is used for bssidx=0. This is linked to the MAC address. - * Since mac80211 allows changing interface types, and we cannot - * force the use of the primary MAC address for a station mode - * interface, we need some other way of configuring a per-interface - * remote BSSID. * The hardware provides an AP-Client feature, where bssidx 0-7 are * used for AP mode and bssidx 8-15 for client mode. * We shift the station interface bss index by 8 to force the - * hardware to recognize the BSSID. - * The resulting bssidx mismatch for unicast frames is ignored by hw. + * hardware to recognize the BSSID as STA. */ if (vif->type == NL80211_IFTYPE_STATION) idx += 8; -- 1.9.3
