Restore behaviour on mt76x0 before commit 1bb04bb4b838 ("mt76: move
mt76x02_init_device in mt76x02-lib module"). This will allow to use
wcid 1 for AP when we work in station mode. It's not clear if this
is needed, but this is how vendor driver assign wcid's in STA mode.
This should be harmless for mt76x2.
Signed-off-by: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
---
drivers/net/wireless/mediatek/mt76/mt76x02_util.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_util.c b/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
index 2be4b527477f..e624397b3d8b 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
@@ -113,7 +113,11 @@ void mt76x02_init_device(struct mt76x02_dev *dev)
ieee80211_hw_set(hw, SUPPORTS_HT_CCK_RATES);
ieee80211_hw_set(hw, SUPPORTS_REORDERING_BUFFER);
- dev->mt76.global_wcid.idx = 255;
+ /* Reserve WCID 0 for mcast - thanks to this APs WCID will go to
+ * entry no. 1 like it does in the vendor driver.
+ */
+ dev->mt76.wcid_mask[0] |= 1;
+ dev->mt76.global_wcid.idx = 0;
dev->mt76.global_wcid.hw_key_idx = -1;
dev->slottime = 9;
--
1.9.3
