Search Linux Wireless

[PATCH v2 2/3] brcmsmac: Use cordic-related macros from common cordic library

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Current driver includes macro that is available from general cordic
library. Use that and drop unused duplicate and unneeded internal
definitions.

Signed-off-by: Priit Laes <plaes@xxxxxxxxx>

---
v2: Use single patch instead of change/removal patches.
---
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_int.h | 7 +-------
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c | 4 ++--
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c   | 4 ++--
 3 files changed, 4 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_int.h b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_int.h
index 4960f7d..e9e8337 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_int.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_int.h
@@ -220,13 +220,6 @@ enum phy_cal_mode {
 #define BB_MULT_MASK		0x0000ffff
 #define BB_MULT_VALID_MASK	0x80000000
 
-#define CORDIC_AG	39797
-#define	CORDIC_NI	18
-#define	FIXED(X)	((s32)((X) << 16))
-
-#define	FLOAT(X) \
-	(((X) >= 0) ? ((((X) >> 15) + 1) >> 1) : -((((-(X)) >> 15) + 1) >> 1))
-
 #define PHY_CHAIN_TX_DISABLE_TEMP	115
 #define PHY_HYSTERESIS_DELTATEMP	5
 
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c
index 9fb0d9f..e78a93a 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c
@@ -3447,8 +3447,8 @@ wlc_lcnphy_start_tx_tone(struct brcms_phy *pi, s32 f_kHz, u16 max_val,
 
 		theta += rot;
 
-		i_samp = (u16) (FLOAT(tone_samp.i * max_val) & 0x3ff);
-		q_samp = (u16) (FLOAT(tone_samp.q * max_val) & 0x3ff);
+		i_samp = (u16)(CORDIC_FLOAT(tone_samp.i * max_val) & 0x3ff);
+		q_samp = (u16)(CORDIC_FLOAT(tone_samp.q * max_val) & 0x3ff);
 		data_buf[t] = (i_samp << 10) | q_samp;
 	}
 
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c
index a57f271..f4f5e90 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c
@@ -23089,8 +23089,8 @@ wlc_phy_gen_load_samples_nphy(struct brcms_phy *pi, u32 f_kHz, u16 max_val,
 
 		theta += rot;
 
-		tone_buf[t].q = (s32) FLOAT(tone_buf[t].q * max_val);
-		tone_buf[t].i = (s32) FLOAT(tone_buf[t].i * max_val);
+		tone_buf[t].q = (s32)CORDIC_FLOAT(tone_buf[t].q * max_val);
+		tone_buf[t].i = (s32)CORDIC_FLOAT(tone_buf[t].i * max_val);
 	}
 
 	wlc_phy_loadsampletable_nphy(pi, tone_buf, num_samps);
-- 
git-series 0.9.1



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux