Search Linux Wireless

Re: [PATCH] mt76x0: use band parameter for LC calibration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2018-10-25 18:18, Stanislaw Gruszka wrote:
> We use always 1 as band parameter for MCU_CAL_LC, this break 2GHz,
> we should use 0 for this band instead.
> 
> Patch fixes problems happened sometimes when try to associate with 2GHz
> AP and manifest by errors like below:
> 
> [14680.920823] wlan0: authenticate with 18:31:bf:c0:51:b0
> [14681.109506] wlan0: send auth to 18:31:bf:c0:51:b0 (try 1/3)
> [14681.310454] wlan0: send auth to 18:31:bf:c0:51:b0 (try 2/3)
> [14681.518469] wlan0: send auth to 18:31:bf:c0:51:b0 (try 3/3)
> [14681.726499] wlan0: authentication with 18:31:bf:c0:51:b0 timed out
> 
> Fixes: 9aec146d0f6b ("mt76x0: pci: introduce mt76x0_phy_calirate routine")
> Signed-off-by: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
Applied, thanks.

- Felix



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux