On 10/9/2018 2:47 PM, Hans de Goede wrote:
For x86 based machines, set the board_type used for nvram file selection
based on the DMI sys-vendor and product-name strings.
Since on some models these strings are too generic, this commit also adds
a quirk table overriding the strings for models listed in that table.
The board_type setting is used to load the board-specific nvram file with
a board-specific name so that we can ship files for each supported board
in linux-firmware.
some comments below....
Reviewed-by: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
.../broadcom/brcm80211/brcmfmac/Makefile | 2 +
.../broadcom/brcm80211/brcmfmac/common.c | 3 +-
.../broadcom/brcm80211/brcmfmac/common.h | 7 ++
.../broadcom/brcm80211/brcmfmac/dmi.c | 104 ++++++++++++++++++
4 files changed, 115 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/Makefile b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/Makefile
index 1f5a9b948abf..22fd95a736a8 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/Makefile
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/Makefile
@@ -54,3 +54,5 @@ brcmfmac-$(CONFIG_BRCM_TRACING) += \
tracepoint.o
brcmfmac-$(CONFIG_OF) += \
of.o
+brcmfmac-$(CONFIG_DMI) += \
+ dmi.o
Assuming OF and DMI are mutual exclusive, right?
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c
new file mode 100644
index 000000000000..fadc0ec745b8
--- /dev/null
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c
[...]
+static const struct dmi_system_id dmi_platform_data[] = {
maybe call this dmi_platform_quirk as in brcmf_dmi_probe() you call this
a "quirk table".
