In order to properly support dynack in ad-hoc mode running
wpa_supplicant, take into account authentication frames for
'late ack' detection. This patch has been tested on devices
mounted on offshore high-voltage stations connected through
~24Km link
Reported-by: Koen Vandeputte <koen.vandeputte@xxxxxxxxxxxx>
Tested-by: Koen Vandeputte <koen.vandeputte@xxxxxxxxxxxx>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/dynack.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/dynack.c b/drivers/net/wireless/ath/ath9k/dynack.c
index 7334c9b09e82..cc0dc966c512 100644
--- a/drivers/net/wireless/ath/ath9k/dynack.c
+++ b/drivers/net/wireless/ath/ath9k/dynack.c
@@ -187,7 +187,8 @@ void ath_dynack_sample_tx_ts(struct ath_hw *ah, struct sk_buff *skb,
/* late ACK */
if (ts->ts_status & ATH9K_TXERR_XRETRY) {
if (ieee80211_is_assoc_req(hdr->frame_control) ||
- ieee80211_is_assoc_resp(hdr->frame_control)) {
+ ieee80211_is_assoc_resp(hdr->frame_control) ||
+ ieee80211_is_auth(hdr->frame_control)) {
ath_dbg(common, DYNACK, "late ack\n");
ath9k_hw_setslottime(ah, (LATEACK_TO - 3) / 2);
ath9k_hw_set_ack_timeout(ah, LATEACK_TO);
--
2.19.1
