From: Dedy Lansky <dlansky@xxxxxxxxxxxxxx>
When enlarging rx_ring_order module param, wil6210 fails to load
because there are not enough Rx buffers.
Fix this by enlarging number of Rx buffers at startup, if needed based
on rx_ring_order.
Signed-off-by: Dedy Lansky <dlansky@xxxxxxxxxxxxxx>
Signed-off-by: Maya Erez <merez@xxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/wil6210/main.c | 2 +-
drivers/net/wireless/ath/wil6210/txrx.c | 4 ++--
drivers/net/wireless/ath/wil6210/txrx_edma.c | 11 ++++++++---
drivers/net/wireless/ath/wil6210/wil6210.h | 2 +-
4 files changed, 12 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 078ad5cf..55084770 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -1689,7 +1689,7 @@ int __wil_up(struct wil6210_priv *wil)
WIL_RX_RING_SIZE_ORDER_DEFAULT :
WIL_RX_RING_SIZE_ORDER_TALYN_DEFAULT;
- rc = wil->txrx_ops.rx_init(wil, 1 << rx_ring_order);
+ rc = wil->txrx_ops.rx_init(wil, rx_ring_order);
if (rc)
return rc;
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 70eceec..c592c8e 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -872,7 +872,7 @@ static void wil_rx_buf_len_init(struct wil6210_priv *wil)
}
}
-static int wil_rx_init(struct wil6210_priv *wil, u16 size)
+static int wil_rx_init(struct wil6210_priv *wil, uint order)
{
struct wil_ring *vring = &wil->ring_rx;
int rc;
@@ -886,7 +886,7 @@ static int wil_rx_init(struct wil6210_priv *wil, u16 size)
wil_rx_buf_len_init(wil);
- vring->size = size;
+ vring->size = 1 << order;
vring->is_rx = true;
rc = wil_vring_alloc(wil, vring);
if (rc)
diff --git a/drivers/net/wireless/ath/wil6210/txrx_edma.c b/drivers/net/wireless/ath/wil6210/txrx_edma.c
index ce71358..fe758f2 100644
--- a/drivers/net/wireless/ath/wil6210/txrx_edma.c
+++ b/drivers/net/wireless/ath/wil6210/txrx_edma.c
@@ -606,9 +606,9 @@ static void wil_rx_buf_len_init_edma(struct wil6210_priv *wil)
WIL_MAX_ETH_MTU : WIL_EDMA_RX_BUF_LEN_DEFAULT;
}
-static int wil_rx_init_edma(struct wil6210_priv *wil, u16 desc_ring_size)
+static int wil_rx_init_edma(struct wil6210_priv *wil, uint desc_ring_order)
{
- u16 status_ring_size;
+ u16 status_ring_size, desc_ring_size = 1 << desc_ring_order;
struct wil_ring *ring = &wil->ring_rx;
int rc;
size_t elem_size = wil->use_compressed_rx_status ?
@@ -623,7 +623,12 @@ static int wil_rx_init_edma(struct wil6210_priv *wil, u16 desc_ring_size)
"compressed RX status cannot be used with SW reorder\n");
return -EINVAL;
}
-
+ if (wil->rx_status_ring_order <= desc_ring_order)
+ /* make sure sring is larger than desc ring */
+ wil->rx_status_ring_order = desc_ring_order + 1;
+ if (wil->rx_buff_id_count <= desc_ring_size)
+ /* make sure we will not run out of buff_ids */
+ wil->rx_buff_id_count = desc_ring_size + 512;
if (wil->rx_status_ring_order < WIL_SRING_SIZE_ORDER_MIN ||
wil->rx_status_ring_order > WIL_SRING_SIZE_ORDER_MAX)
wil->rx_status_ring_order = WIL_RX_SRING_SIZE_ORDER_DEFAULT;
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 414de54..31753f94 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -614,7 +614,7 @@ struct wil_txrx_ops {
int cid, int tid);
irqreturn_t (*irq_tx)(int irq, void *cookie);
/* RX ops */
- int (*rx_init)(struct wil6210_priv *wil, u16 ring_size);
+ int (*rx_init)(struct wil6210_priv *wil, uint ring_order);
void (*rx_fini)(struct wil6210_priv *wil);
int (*wmi_addba_rx_resp)(struct wil6210_priv *wil, u8 mid, u8 cid,
u8 tid, u8 token, u16 status, bool amsdu,
--
1.9.1
