Use mt76_poll_msec utility routine for CORE_R34 register polling
instead of mt76_poll in order to allow the hw to complete requested
calibration since on slow devices (e.g. mt7620 based boards) calibration
takes longer than 2ms
Fixes: 66a34c66e0cb ("mt76x0: phy: add phy/vco temperature compensation")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
---
drivers/net/wireless/mediatek/mt76/mt76x0/phy.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
index c734987a344c..830ea6047f10 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
@@ -686,8 +686,7 @@ static void mt76x0_phy_temp_sensor(struct mt76x02_dev *dev)
mt76x0_rf_wr(dev, MT_RF(0, 67), 0x01);
mt76_wr(dev, MT_BBP(CORE, 34), 0x00080055);
-
- if (!mt76_poll(dev, MT_BBP(CORE, 34), BIT(4), 0, 2000)) {
+ if (!mt76_poll_msec(dev, MT_BBP(CORE, 34), BIT(4), 0, 200)) {
mt76_clear(dev, MT_BBP(CORE, 34), BIT(4));
goto done;
}
--
2.19.1
