We always wait for CMD_CALIBRATION_OP mcu message, but wait argument is used
for do additioanl MT_MCU_COM_REG0 register operations, which are needed
for MMIO devices and we can use mt76_is_mmio() check instead of wait argument.
Signed-off-by: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
---
drivers/net/wireless/mediatek/mt76/mt76x0/phy.c | 14 ++++++--------
drivers/net/wireless/mediatek/mt76/mt76x02_mcu.c | 7 +++----
drivers/net/wireless/mediatek/mt76/mt76x02_mcu.h | 3 +--
drivers/net/wireless/mediatek/mt76/mt76x2/mt76x2.h | 2 +-
.../net/wireless/mediatek/mt76/mt76x2/pci_phy.c | 22 +++++++++++-----------
drivers/net/wireless/mediatek/mt76/mt76x2/phy.c | 4 ++--
.../net/wireless/mediatek/mt76/mt76x2/usb_phy.c | 20 ++++++++++----------
7 files changed, 34 insertions(+), 38 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
index ca24b5716b58..42351179c3cc 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
@@ -529,9 +529,8 @@ void mt76x0_phy_calibrate(struct mt76x02_dev *dev, bool power_on)
return;
if (power_on) {
- mt76x02_mcu_calibrate(dev, MCU_CAL_R, 0, false);
- mt76x02_mcu_calibrate(dev, MCU_CAL_VCO, chan->hw_value,
- false);
+ mt76x02_mcu_calibrate(dev, MCU_CAL_R, 0);
+ mt76x02_mcu_calibrate(dev, MCU_CAL_VCO, chan->hw_value);
usleep_range(10, 20);
/* XXX: tssi */
}
@@ -554,14 +553,14 @@ void mt76x0_phy_calibrate(struct mt76x02_dev *dev, bool power_on)
val = 0x600;
}
- mt76x02_mcu_calibrate(dev, MCU_CAL_FULL, val, false);
+ mt76x02_mcu_calibrate(dev, MCU_CAL_FULL, val);
msleep(350);
- mt76x02_mcu_calibrate(dev, MCU_CAL_LC, is_5ghz, false);
+ mt76x02_mcu_calibrate(dev, MCU_CAL_LC, is_5ghz);
usleep_range(15000, 20000);
mt76_wr(dev, MT_BBP(IBI, 9), reg_val);
mt76_wr(dev, MT_TX_ALC_CFG_0, tx_alc);
- mt76x02_mcu_calibrate(dev, MCU_CAL_RXDCOC, 1, false);
+ mt76x02_mcu_calibrate(dev, MCU_CAL_RXDCOC, 1);
}
EXPORT_SYMBOL_GPL(mt76x0_phy_calibrate);
@@ -698,8 +697,7 @@ static void mt76x0_phy_temp_sensor(struct mt76x02_dev *dev)
if (abs(val - dev->cal.temp_vco) > 20) {
mt76x02_mcu_calibrate(dev, MCU_CAL_VCO,
- dev->mt76.chandef.chan->hw_value,
- false);
+ dev->mt76.chandef.chan->hw_value);
dev->cal.temp_vco = val;
}
if (abs(val - dev->cal.temp) > 30) {
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_mcu.c b/drivers/net/wireless/mediatek/mt76/mt76x02_mcu.c
index 550e73f81438..254bf3d22d94 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_mcu.c
@@ -165,8 +165,7 @@ int mt76x02_mcu_set_radio_state(struct mt76x02_dev *dev, bool on,
}
EXPORT_SYMBOL_GPL(mt76x02_mcu_set_radio_state);
-int mt76x02_mcu_calibrate(struct mt76x02_dev *dev, int type,
- u32 param, bool wait)
+int mt76x02_mcu_calibrate(struct mt76x02_dev *dev, int type, u32 param)
{
struct {
__le32 id;
@@ -177,7 +176,7 @@ int mt76x02_mcu_calibrate(struct mt76x02_dev *dev, int type,
};
int ret;
- if (wait)
+ if (mt76_is_mmio(dev))
mt76_rmw(dev, MT_MCU_COM_REG0, BIT(31), 0);
ret = mt76_mcu_send_msg(dev, CMD_CALIBRATION_OP, &msg, sizeof(msg),
@@ -185,7 +184,7 @@ int mt76x02_mcu_calibrate(struct mt76x02_dev *dev, int type,
if (ret)
return ret;
- if (wait &&
+ if (mt76_is_mmio(dev) &&
WARN_ON(!mt76_poll_msec(dev, MT_MCU_COM_REG0,
BIT(31), BIT(31), 100)))
return -ETIMEDOUT;
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_mcu.h b/drivers/net/wireless/mediatek/mt76/mt76x02_mcu.h
index a3aee579d42c..605cdb44961a 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_mcu.h
@@ -97,8 +97,7 @@ struct mt76x02_patch_header {
};
int mt76x02_mcu_cleanup(struct mt76x02_dev *dev);
-int mt76x02_mcu_calibrate(struct mt76x02_dev *dev, int type,
- u32 param, bool wait);
+int mt76x02_mcu_calibrate(struct mt76x02_dev *dev, int type, u32 param);
int mt76x02_mcu_msg_send(struct mt76_dev *mdev, int cmd, const void *data,
int len, bool wait_resp);
int mt76x02_mcu_function_select(struct mt76x02_dev *dev,
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2/mt76x2.h b/drivers/net/wireless/mediatek/mt76/mt76x2/mt76x2.h
index e5846a85d6ab..b259e4b50f1e 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x2/mt76x2.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2/mt76x2.h
@@ -78,7 +78,7 @@ void mt76x2_init_txpower(struct mt76x02_dev *dev,
struct ieee80211_supported_band *sband);
void mt76_write_mac_initvals(struct mt76x02_dev *dev);
-void mt76x2_phy_tssi_compensate(struct mt76x02_dev *dev, bool wait);
+void mt76x2_phy_tssi_compensate(struct mt76x02_dev *dev);
void mt76x2_phy_set_txpower_regs(struct mt76x02_dev *dev,
enum nl80211_band band);
void mt76x2_configure_tx_delay(struct mt76x02_dev *dev,
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2/pci_phy.c b/drivers/net/wireless/mediatek/mt76/mt76x2/pci_phy.c
index 16ff6c376373..59ef7931df50 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x2/pci_phy.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2/pci_phy.c
@@ -38,7 +38,7 @@ mt76x2_phy_tssi_init_cal(struct mt76x02_dev *dev)
if (mt76x02_ext_pa_enabled(dev, chan->band))
flag |= BIT(8);
- mt76x02_mcu_calibrate(dev, MCU_CAL_TSSI, flag, true);
+ mt76x02_mcu_calibrate(dev, MCU_CAL_TSSI, flag);
dev->cal.tssi_cal_done = true;
return true;
}
@@ -62,13 +62,13 @@ mt76x2_phy_channel_calibrate(struct mt76x02_dev *dev, bool mac_stopped)
mt76x2_mac_stop(dev, false);
if (is_5ghz)
- mt76x02_mcu_calibrate(dev, MCU_CAL_LC, 0, true);
+ mt76x02_mcu_calibrate(dev, MCU_CAL_LC, 0);
- mt76x02_mcu_calibrate(dev, MCU_CAL_TX_LOFT, is_5ghz, true);
- mt76x02_mcu_calibrate(dev, MCU_CAL_TXIQ, is_5ghz, true);
- mt76x02_mcu_calibrate(dev, MCU_CAL_RXIQC_FI, is_5ghz, true);
- mt76x02_mcu_calibrate(dev, MCU_CAL_TEMP_SENSOR, 0, true);
- mt76x02_mcu_calibrate(dev, MCU_CAL_TX_SHAPING, 0, true);
+ mt76x02_mcu_calibrate(dev, MCU_CAL_TX_LOFT, is_5ghz);
+ mt76x02_mcu_calibrate(dev, MCU_CAL_TXIQ, is_5ghz);
+ mt76x02_mcu_calibrate(dev, MCU_CAL_RXIQC_FI, is_5ghz);
+ mt76x02_mcu_calibrate(dev, MCU_CAL_TEMP_SENSOR, 0);
+ mt76x02_mcu_calibrate(dev, MCU_CAL_TX_SHAPING, 0);
if (!mac_stopped)
mt76x2_mac_resume(dev);
@@ -223,14 +223,14 @@ int mt76x2_phy_set_channel(struct mt76x02_dev *dev,
u8 val = mt76x02_eeprom_get(dev, MT_EE_BT_RCAL_RESULT);
if (val != 0xff)
- mt76x02_mcu_calibrate(dev, MCU_CAL_R, 0, true);
+ mt76x02_mcu_calibrate(dev, MCU_CAL_R, 0);
}
- mt76x02_mcu_calibrate(dev, MCU_CAL_RXDCOC, channel, true);
+ mt76x02_mcu_calibrate(dev, MCU_CAL_RXDCOC, channel);
/* Rx LPF calibration */
if (!dev->cal.init_cal_done)
- mt76x02_mcu_calibrate(dev, MCU_CAL_RC, 0, true);
+ mt76x02_mcu_calibrate(dev, MCU_CAL_RC, 0);
dev->cal.init_cal_done = true;
@@ -294,7 +294,7 @@ void mt76x2_phy_calibrate(struct work_struct *work)
dev = container_of(work, struct mt76x02_dev, cal_work.work);
mt76x2_phy_channel_calibrate(dev, false);
- mt76x2_phy_tssi_compensate(dev, true);
+ mt76x2_phy_tssi_compensate(dev);
mt76x2_phy_temp_compensate(dev);
mt76x2_phy_update_channel_gain(dev);
ieee80211_queue_delayed_work(mt76_hw(dev), &dev->cal_work,
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2/phy.c b/drivers/net/wireless/mediatek/mt76/mt76x2/phy.c
index bbeff9c19997..3ac5dd0f0400 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x2/phy.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2/phy.c
@@ -210,7 +210,7 @@ void mt76x2_configure_tx_delay(struct mt76x02_dev *dev,
}
EXPORT_SYMBOL_GPL(mt76x2_configure_tx_delay);
-void mt76x2_phy_tssi_compensate(struct mt76x02_dev *dev, bool wait)
+void mt76x2_phy_tssi_compensate(struct mt76x02_dev *dev)
{
struct ieee80211_channel *chan = dev->mt76.chandef.chan;
struct mt76x2_tx_power_info txp;
@@ -245,7 +245,7 @@ void mt76x2_phy_tssi_compensate(struct mt76x02_dev *dev, bool wait)
return;
usleep_range(10000, 20000);
- mt76x02_mcu_calibrate(dev, MCU_CAL_DPD, chan->hw_value, wait);
+ mt76x02_mcu_calibrate(dev, MCU_CAL_DPD, chan->hw_value);
dev->cal.dpd_cal_done = true;
}
}
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2/usb_phy.c b/drivers/net/wireless/mediatek/mt76/mt76x2/usb_phy.c
index 8011c261c658..2a2de7bee6b2 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x2/usb_phy.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2/usb_phy.c
@@ -29,12 +29,12 @@ void mt76x2u_phy_channel_calibrate(struct mt76x02_dev *dev)
mt76x2u_mac_stop(dev);
if (is_5ghz)
- mt76x02_mcu_calibrate(dev, MCU_CAL_LC, 0, false);
+ mt76x02_mcu_calibrate(dev, MCU_CAL_LC, 0);
- mt76x02_mcu_calibrate(dev, MCU_CAL_TX_LOFT, is_5ghz, false);
- mt76x02_mcu_calibrate(dev, MCU_CAL_TXIQ, is_5ghz, false);
- mt76x02_mcu_calibrate(dev, MCU_CAL_RXIQC_FI, is_5ghz, false);
- mt76x02_mcu_calibrate(dev, MCU_CAL_TEMP_SENSOR, 0, false);
+ mt76x02_mcu_calibrate(dev, MCU_CAL_TX_LOFT, is_5ghz);
+ mt76x02_mcu_calibrate(dev, MCU_CAL_TXIQ, is_5ghz);
+ mt76x02_mcu_calibrate(dev, MCU_CAL_RXIQC_FI, is_5ghz);
+ mt76x02_mcu_calibrate(dev, MCU_CAL_TEMP_SENSOR, 0);
mt76x2u_mac_resume(dev);
}
@@ -44,7 +44,7 @@ void mt76x2u_phy_calibrate(struct work_struct *work)
struct mt76x02_dev *dev;
dev = container_of(work, struct mt76x02_dev, cal_work.work);
- mt76x2_phy_tssi_compensate(dev, false);
+ mt76x2_phy_tssi_compensate(dev);
mt76x2_phy_update_channel_gain(dev);
ieee80211_queue_delayed_work(mt76_hw(dev), &dev->cal_work,
@@ -142,14 +142,14 @@ int mt76x2u_phy_set_channel(struct mt76x02_dev *dev,
u8 val = mt76x02_eeprom_get(dev, MT_EE_BT_RCAL_RESULT);
if (val != 0xff)
- mt76x02_mcu_calibrate(dev, MCU_CAL_R, 0, false);
+ mt76x02_mcu_calibrate(dev, MCU_CAL_R, 0);
}
- mt76x02_mcu_calibrate(dev, MCU_CAL_RXDCOC, channel, false);
+ mt76x02_mcu_calibrate(dev, MCU_CAL_RXDCOC, channel);
/* Rx LPF calibration */
if (!dev->cal.init_cal_done)
- mt76x02_mcu_calibrate(dev, MCU_CAL_RC, 0, false);
+ mt76x02_mcu_calibrate(dev, MCU_CAL_RC, 0);
dev->cal.init_cal_done = true;
mt76_wr(dev, MT_BBP(AGC, 61), 0xff64a4e2);
@@ -182,7 +182,7 @@ int mt76x2u_phy_set_channel(struct mt76x02_dev *dev,
flag |= BIT(0);
if (mt76x02_ext_pa_enabled(dev, chan->band))
flag |= BIT(8);
- mt76x02_mcu_calibrate(dev, MCU_CAL_TSSI, flag, false);
+ mt76x02_mcu_calibrate(dev, MCU_CAL_TSSI, flag);
dev->cal.tssi_cal_done = true;
}
}
--
2.7.5
