After commit 3c83dd577c7f ("wlcore: Add support for optional
wakeirq") landed upstream, I started seeing the following oops
on my HiKey board:
[ 1.870279] Unable to handle kernel read from unreadable memory at virtual address 0000000000000010
[ 1.870283] Mem abort info:
[ 1.870287] ESR = 0x96000005
[ 1.870292] Exception class = DABT (current EL), IL = 32 bits
[ 1.870296] SET = 0, FnV = 0
[ 1.870299] EA = 0, S1PTW = 0
[ 1.870302] Data abort info:
[ 1.870306] ISV = 0, ISS = 0x00000005
[ 1.870309] CM = 0, WnR = 0
[ 1.870312] [0000000000000010] user address but active_mm is swapper
[ 1.870318] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[ 1.870327] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 4.19.0-05129-gb3d1e8e #48
[ 1.870331] Hardware name: HiKey Development Board (DT)
[ 1.870350] Workqueue: events_freezable mmc_rescan
[ 1.870358] pstate: 60400005 (nZCv daif +PAN -UAO)
[ 1.870366] pc : wl1271_probe+0x210/0x350
[ 1.870371] lr : wl1271_probe+0x210/0x350
[ 1.870374] sp : ffffff80080739b0
[ 1.870377] x29: ffffff80080739b0 x28: 0000000000000000
[ 1.870384] x27: 0000000000000000 x26: 0000000000000000
[ 1.870391] x25: 0000000000000036 x24: ffffffc074ecb598
[ 1.870398] x23: ffffffc07ffdce78 x22: ffffffc0744ed808
[ 1.870404] x21: ffffffc074ecbb98 x20: ffffff8008ff9000
[ 1.870411] x19: ffffffc0744ed800 x18: ffffff8008ff9a48
[ 1.870418] x17: 0000000000000000 x16: 0000000000000000
[ 1.870425] x15: ffffffc074ecb503 x14: ffffffffffffffff
[ 1.870431] x13: ffffffc074ecb502 x12: 0000000000000030
[ 1.870438] x11: 0101010101010101 x10: 0000000000000040
[ 1.870444] x9 : ffffffc075400248 x8 : ffffffc075400270
[ 1.870451] x7 : 0000000000000000 x6 : 0000000000000000
[ 1.870457] x5 : 0000000000000000 x4 : 0000000000000000
[ 1.870463] x3 : 0000000000000000 x2 : 0000000000000000
[ 1.870469] x1 : 0000000000000028 x0 : 0000000000000000
[ 1.870477] Process kworker/0:0 (pid: 5, stack limit = 0x(____ptrval____))
[ 1.870480] Call trace:
[ 1.870485] wl1271_probe+0x210/0x350
[ 1.870491] sdio_bus_probe+0x100/0x128
[ 1.870500] really_probe+0x1a8/0x2b8
[ 1.870506] driver_probe_device+0x58/0x100
[ 1.870511] __device_attach_driver+0x94/0xd8
[ 1.870517] bus_for_each_drv+0x70/0xc8
[ 1.870522] __device_attach+0xe0/0x140
[ 1.870527] device_initial_probe+0x10/0x18
[ 1.870532] bus_probe_device+0x94/0xa0
[ 1.870537] device_add+0x374/0x5b8
[ 1.870542] sdio_add_func+0x60/0x88
[ 1.870546] mmc_attach_sdio+0x1b0/0x358
[ 1.870551] mmc_rescan+0x2cc/0x390
[ 1.870558] process_one_work+0x12c/0x320
[ 1.870563] worker_thread+0x48/0x458
[ 1.870569] kthread+0xf8/0x128
[ 1.870575] ret_from_fork+0x10/0x18
[ 1.870583] Code: 92400c21 b2760021 a90687a2 97e95bf9 (f9400803)
[ 1.870587] ---[ end trace 1e15f81d3c139ca9 ]---
It seems since we don't have a wakeirq value in the dts, the wakeirq
value in wl1271_probe() is zero, which then causes trouble in
irqd_get_trigger_type(irq_get_irq_data(wakeirq)).
This patch tries to address this by checking if wakeirq is zero,
and not trying to add it to the resources if that is the case.
Cc: Tony Lindgren <tony@xxxxxxxxxxx>
Cc: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
Cc: Eyal Reizer <eyalr@xxxxxx>
Cc: Anders Roxell <anders.roxell@xxxxxxxxxx>
Cc: linux-wireless@xxxxxxxxxxxxxxx
Acked-by: Tony Lindgren <tony@xxxxxxxxxxx>
Signed-off-by: John Stultz <john.stultz@xxxxxxxxxx>
---
drivers/net/wireless/ti/wlcore/sdio.c | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c
index 4c2154b..bd10165 100644
--- a/drivers/net/wireless/ti/wlcore/sdio.c
+++ b/drivers/net/wireless/ti/wlcore/sdio.c
@@ -285,7 +285,7 @@ static int wl1271_probe(struct sdio_func *func,
struct resource res[2];
mmc_pm_flag_t mmcflags;
int ret = -ENOMEM;
- int irq, wakeirq;
+ int irq, wakeirq, num_irqs;
const char *chip_family;
/* We are only able to handle the wlan function */
@@ -353,12 +353,17 @@ static int wl1271_probe(struct sdio_func *func,
irqd_get_trigger_type(irq_get_irq_data(irq));
res[0].name = "irq";
- res[1].start = wakeirq;
- res[1].flags = IORESOURCE_IRQ |
- irqd_get_trigger_type(irq_get_irq_data(wakeirq));
- res[1].name = "wakeirq";
- ret = platform_device_add_resources(glue->core, res, ARRAY_SIZE(res));
+ if (wakeirq > 0) {
+ res[1].start = wakeirq;
+ res[1].flags = IORESOURCE_IRQ |
+ irqd_get_trigger_type(irq_get_irq_data(wakeirq));
+ res[1].name = "wakeirq";
+ num_irqs = 2;
+ } else {
+ num_irqs = 1;
+ }
+ ret = platform_device_add_resources(glue->core, res, num_irqs);
if (ret) {
dev_err(glue->dev, "can't add resources\n");
goto out_dev_put;
--
2.7.4
