> On Thu, Oct 18, 2018 at 11:28:19AM +0200, Lorenzo Bianconi wrote:
> > > On Thu, Oct 18, 2018 at 11:13:36AM +0200, Lorenzo Bianconi wrote:
> > > > > static void mt76x0_phy_ant_select(struct mt76x02_dev *dev)
> > > > > {
> > > > > - struct ieee80211_channel *chan = dev->mt76.chandef.chan;
> > > > > -
> > > > > - /* single antenna mode */
> > > > > - if (chan->band == NL80211_BAND_2GHZ) {
> > > > > - mt76_rmw(dev, MT_COEXCFG3,
> > > > > - BIT(5) | BIT(4) | BIT(3) | BIT(2), BIT(1));
> > > > > - mt76_rmw(dev, MT_WLAN_FUN_CTRL, BIT(5), BIT(6));
> > > > > + u16 ee_ant = mt76x02_eeprom_get(dev, MT_EE_ANTENNA);
> > > > > + u16 nic_conf2 = mt76x02_eeprom_get(dev, MT_EE_NIC_CONF_2);
> > > > > + u32 wlan, coex3, cmb;
> > > > > + bool ant_div;
> > > > > +
> > > > > + wlan = mt76_rr(dev, MT_WLAN_FUN_CTRL);
> > > > > + cmb = mt76_rr(dev, MT_CMB_CTRL);
> > > > > + coex3 = mt76_rr(dev, MT_COEXCFG3);
> > > > > +
> > > > > + cmb &= ~(BIT(15) | BIT(12));
> > > >
> > > > I guess should be BIT(14) here (at least for single antenna mode)
> > >
> > > Yes , I will fix it.
> > >
> > > > > + coex3 &= ~GENMASK(5, 1);
> > > >
> > > > according to vendor sdk BIT(1) should not cleared if device supports 5GHz band
> > > > (signle antenna mode)
> > >
> > > It is set below for that case:
> >
> > it is set just if the device does not support 5GHz band but it is cleared in
> > the other case (and sdk driver does not clear it in that case, do not know if
> > it does a real difference)
>
> On GPL realeased driver for MT7610U ( mt7610u_wifi_sta_v3002_dpo_2013091 )
> it's like this:
>
> CoexCfg3 &= ~(BIT5 | BIT4 | BIT3 | BIT2 | BIT1);
here I have:
CoexCfg3 &= ~(BIT5 | BIT4 | BIT3 | BIT2);
>
> <snip>
>
> {
> if (WMODE_CAP_5G(pAd->CommonCfg.PhyMode))
> {
> CoexCfg3 |= (BIT3 | BIT4); /* 0x4C[3]=1, 0x4C[4]=1 */
> }
> else
> {
> WlanFunCtrl |= BIT6; /* 0x80[6]=1 */
> CoexCfg3 |= BIT1; /* 0x4C[1]=1 */
> }
> DBGPRINT(RT_DEBUG_ERROR, ("%s - Single antenna mode\n", __FUNCTION__));
> }
>
> Which I belive is reflected in my patch in this parts:
>
correct :)
> coex3 &= ~GENMASK(5, 1);
>
> <snip>
>
> if (dev->mt76.cap.has_5ghz) {
> coex3 |= BIT(3) | BIT(4);
> } else {
> wlan |= BIT(6);
> coex3 |= BIT(1);
> }
>
> Does your SDK do something diffrent ?
>
> Thanks
> Stanislaw
