Rakesh Pillai <pillair@xxxxxxxxxxxxxx> wrote: > The host driver currently expects the channel info event to be > received in pairs for all the channels, i.e. the first > chan_info event for a particular channel will not have the > COMPLETE flag set and the second chan_info event for the > same channel will have the COMPLETE flag set. > > The HL2.0 firmware sends only one channel info event per channel > which is scanned without the COMPLETE flag set. After sending the > chan_info_event for all the channels, the HL2.0 firmware sends a > chan_info_event with COMPLETE flag set to indicate the completion > of the channel info event. > > The firmware does not indicate this behavior with any service bitmap > and hence a new firmware feature flag is used to handle the modified > parsing of the channel info events, in the host driver, for the > firmware which sends single channel info event per scanned channel. > > Tested HW: WCN3990 > Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1 > > Co-developed-by: Surabhi Vishnoi <svishnoi@xxxxxxxxxxxxxx> > Signed-off-by: Surabhi Vishnoi <svishnoi@xxxxxxxxxxxxxx> > Signed-off-by: Rakesh Pillai <pillair@xxxxxxxxxxxxxx> > Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx> Kbuild bot reported some errors: >> ERROR: "__udivdi3" [drivers/net/wireless/ath/ath10k/ath10k_core.ko] undefined! >> ERROR: "__divdi3" [drivers/net/wireless/ath/ath10k/ath10k_core.ko] undefined! Need to investigate those if they are valid or problem with the bot. -- https://patchwork.kernel.org/patch/10624567/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
